Sony DAV-DZ531W Operating Instructions Manual page 12

6
Adjust the height of the speaker.
Loosen (but do not remove) the screws, adjust the height of the speaker, then secure the screws.
Adjust the speaker of one side, then adjust another speaker by checking lines as a guide.
Note
• When adjusting the height of the speaker, grasp the speaker so that the speaker does not fall.
Loosen 2 screws.
7
Take up any speaker cord slack.
Take up slack in the speaker cord by pulling from the bottom of the base.
12
GB
Lines
Post
Secure the speaker cord by
running it through the slot.
Adjust the length of the cord.
,
In addition to the screws
secured in Step 3, secure
2 more screws. (Secure 4
screws in total.)