Download Print this page

Sealcom KAKADU Programming Manual

www.sealcom.eu

Table of Contents

Need help?

Do you have a question about the KAKADU and is the answer not in the manual?

Page 1 PROGRAMMING MANUAL www.sealcom.eu...
Page 2 DESCRIPTION Re-programming of the KAKADU doorbell (i.e. uploading of new sounds) is performed with the help of a computer. hardware requirements: - PC computer with a 200MHz processor or better - LPT (Centronics) printer port - Windows 9x/2000/XP operating system...
Page 3 Fig. 2. making the cable by yourself Materials and tools needed for making the cable for bell programming: - 6-core cable with a max. length of 3 metres (6x0.5) - male connector DB25 (with pins) - 6-pin connector HU-06 - tin - soldering tool - flat nose pliers.
Page 4 Fig. 3. HU-06 6-core cable (max. 3 m) (top view) DB25 (male) preparation of sounds In order to assure adequate quality of signals, preliminary processing of sounds is advisable. It can be done with the help of any editor of sound files (for example, "Sound Forge", "Cool Edit", "Gold Wave", "AWave Studio"...
Page 5 Download section. After the software has been installed, the "Kakadu.exe" executable should be run, and then, the instructions included in the program must be followed. CAUTION! Connection of a 9V battery is necessary for programming.
Page 6 “available sounds”, and then you can build various melodies from it. And just in this case, you can create as many as 128 signals. Each signal will be different, but they all will be built from the same “building material”. Copyright © 2007 Sealcom...