Disc; Playing A Disc - Sony Bravia Theater DAVHDZ273 Operating Instructions Manual

Disc

Playing a Disc

Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
"/1
A
Disc tray
STEP
/ ,
/
/m/
M/
X
1
Turn on your TV.
2
Switch the input selector on the TV to
this system.
3
Press "/1.
The system turns on.
Unless the system is set to "DVD," press
FUNCTION +/– to select "DVD."
4
Press A.
5
Load a disc.
Adjust the volume
H
FUNCTION
Connect
headphones
"/1
FUNCTION
+/–
MUTING
VOLUME +/–
./>
H
x
Place one disc on the tray, and then press A.
Note
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
6
Press H.
The system starts playback (continuous
play).
7
Adjust the volume by using VOLUME +/
– on the remote or the VOLUME control
on the unit.
The volume level appears on the TV screen
and in the front panel display.
Note
• Depending on the system status, the volume level
may not appear on the TV screen.
• When you set the Control for HDMI function to on,
the TV that is connected to the system with an HDMI
cable (not supplied) can be sync-operated with the
system. For details, see "Using the Control for HDMI
Function for "BRAVIA" Sync" (page 56).
To turn the system off
Press "/1 while the system is on. The system
enters standby mode.
To save power in standby mode
Press "/1 while the system is on.
To enter power saving mode, make sure that the
system is in the following status.
– "DEMO" is set to "OFF" (page 20).
– [CONTROL FOR HDMI] is set to [OFF]
(page 56).
To use the headphones
Connect the headphones to PHONES jack on the
unit. The sound of the system is muted.
29
US