Using The On-Screen Display To Search - Sony CMT-SX2D Operating Instructions Manual

Using the on-screen
display to search
You can search for a chapter (DVD) and track
(VIDEO CD, CD). As chapters and tracks are
assigned unique numbers on the disc, so you can
select the desired one by entering its number. Or,
you can search for a particular point using the
time code (Time Search).
Searching for a chapter
1
Press SEARCH.
The Search Display appears.
2
Press M or m repeatedly to select
"Chapter."
3
Press the number buttons to select the
desired chapter number.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
4
Press ENTER.
Playback starts from the selected number.
Searching for a track
1
Press SEARCH.
The Search Display appears.
2
Press M or m repeatedly to select
"Track."
3
Press the number buttons to select the
desired track number.
If you make a mistake, press CLEAR to
cancel the number, then select another
number.
4
Press ENTER.
Playback starts from the selected number.
20 GB
Searching for a particular
point using the time code
— Time Search
1
Press SEARCH.
The Search Display appears.
2
Press M or m repeatedly to select
"Time."
3
Press the number buttons to input the
time code, then press ENTER.
When playing a DVD, input the playing
time of the current title.
When playing a VIDEO CD/CD, input the
playing time of the current track.
For example, to find the scene at 2 hours,
10 minutes, and 20 seconds after the
beginning, enter "2:10:20".
Note
The time search function does not work on a VIDEO
CD (when the PBC function is on).
To cancel searching
Press SEARCH repeatedly until the display
disappears.