Fujitsu PRIMERGY 10/40GbE Connection Blade 18/8+2 Function Manual page 30

1 action is consumed when following commands are set and only 1 action is consumed irrespective of
number of command specifications.
- vlan <vid> protocol ipv4
- vlan <vid> protocol ipv6
When the following commands are set, 1 action is consumed.
When <tos_value>, <dscp_value> and <queue_value> are same, only 1 action is consumed
irrespective of the number of command specification.
- interface Config mode
- qos aclmap <count> tos <tos_value> <acl>
- qos aclmap <count> dscp <dscp_value> <acl>
- qos aclmap <count> queue <queue_value> <acl>
- ip6qos aclmap <count> dscp <dscp_value> <acl>
- ip6qos aclmap <count> queue <queue_value> <acl>
- vlan <vid> qos aclmap <count> tos <tos_value> <acl>
- vlan <vid> qos aclmap <count> dscp <dscp_value> <acl>
- vlan <vid> qos aclmap <count> queue <queue_value> <acl>
- vlan <vid> ip6qos aclmap <count> dscp <dscp_value> <acl>
- vlan <vid> ip6qos aclmap <count> queue <queue_value> <acl>
- lan <number> ip dscp <count> acl <acl_count> <dscp_value>
- lan <number> ip6 dscp <count> acl <acl_count> <dscp_value>
When chengeQueue is set by the following commands, 1 action is consumed.
- interface Config mode
- qos aclmap <count> tos <tos_value> <acl> [ chengeQueue ]
- qos aclmap <count> dscp <dscp_value> <acl> [ chengeQueue ]
- ip6qos aclmap <count> dscp <dscp_value> <acl> [ chengeQueue ]
- vlan <vid> qos aclmap <count> tos <tos_value> <acl> [ chengeQueue ]
- vlan <vid> qos aclmap <count> dscp <dscp_value> <acl> [ chengeQueue ]
- vlan <vid> ip6qos aclmap <count> dscp <dscp_value> <acl> [ chengeQueue ]
When the following commands are set, 1 action is consumed.
When <vid> is same, only 1 action is consumed irrespective of the number of
command specification.
Points to be noted
When used with protocol VLAN function, QoS function is disabled for the frame identified as protocol VLAN.
Refer to "vlan protocol" command item for the frame recognized as protocol VLAN.
When used with MAC filter function, QoS function is disabled for packets corresponding to the MAC filter
function.
Moreover, QoS that uses ACL is disabled for the packets that are applied for IP MAC filter.
When priority determination method of packets is set, it is as follows.
・qos classification ip tos on
For IPv4 frame, 'IP precedence' field becomes a target of CoS value of "acl vlan" command option.
・qos classification ip6 tc on
For 'IPv6 frame', top position 3bit of 'traffic class' field of IPv6 becomes the target of CoS value of "acl vlan"
command option.
Page 30 of 71