LINK-MI SPDIF User Manual

Digital optical audio splitter 1x3

U S E R

M A N U A L

SPDIF/TOSLINK

Digital Optical Audio Splitter 1x3

Table of Contents

Need help?

Do you have a question about the SPDIF and is the answer not in the manual?

Page 1 U S E R M A N U A L SPDIF/TOSLINK Digital Optical Audio Splitter 1x3...
Page 2 Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments. FEATURES One ways of optical fiber signal input splitter to three sets of SPDIF/TosLink signal  receiving device. Audio format support : LPCM2.0/DTS/Dolby-AC3 ...
Page 3 Physical Connection Showing Picture ： Figure 1.0 Front Panel Showing Picture 1. Power indication Figure 1.1 Rear Panel Showing Picture 2. SPDIF/TosLink output port 1,2 3. SPDIF/TosLink output port 3 4. SPDIF/TosLink input port 5. DC/5V Power Adapter Interface...
Page 4: Specifications
Operating and Connecting ： To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the splitter input. To let the splitter output port connected to the optical fiber signal receiver (such as amplifier, home theater and so on) by using the optical cable.
Page 5 Before power on, pls check the connection line carefully. And make sure that all interfaces are normally connected. The common trouble shooting way shows below: Trouble Serial NO Cause and Ways to deal with Description 1 、 Check if the power adapter head is truly and Non-Power- correctly inserted the power socket.

Toslink