Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Customer Care section and order the part
needed, e-mail us at customer.care@staminaproducts.com, or call us toll free at 1-800-375-7520 (in
the U.S.). Our Customer Care Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Refer to illustration 1. The two LEGS w/ holes(3) must
be attached to opposite sides of the Mounting Bar on
the RAIL FRAME(1). Insert the LEGS w/ holes(3) into
the RAIL FRAME(1), lift the Safety Pad and insert the
BUTTON HEAD BOLTS(M8x1.25x40mm)(24) into the
RAIL FRAME(1) to bolt the LEGS w/ holes(3) in position.
Do the same to attach the other four LEGS(2) onto the RAIL
FRAME(1) with BUTTON HEAD BOLTS(M8x1.25x40mm)
(24).
STEP 2
Identify the LEFT and RIGHT HANDRAIL SUPPORTS
(6, 7), and the LEFT and RIGHT HANDRAILS(8, 9).
Refer to illustration 2. Attach the LEFT and RIGHT
HANDRAIL SUPPORTS(6, 7) to the LEGS w/ holes(3)
with ARC WASHERS(M8)(26), LOCK WASHERS(M8)
(35), and ACORN NUTS(M8x1.25)(27).
STEP 3
Insert both ends of the TOP HANDRAIL(10) into the LEFT
and RIGHT HANDRAILS(8, 9) and lock with the BUTTON
PINS(14). Insert the LEFT and RIGHT HANDRAILS(8, 9)
into the LEFT and RIGHT HANDRAIL SUPPORTS(6, 7)
and lock in position with the ADJUSTMENT KNOBS(12).
NOTE: There are marks on the HANDRAILS(8, 9) to help
to set the height of the handrail.
8
1.
Safety
Pad
Mounting Bar
Leg w/
holes(3)
Leg w/
holes(3)
2.
Button Pin(14)
Advertisement
Table of Contents
