Table Of Contents - Sabre Abstract CE Series Manual

Abstract CE Manual
226
230
234
238
242
246
250
254
Note: the unit 'snaps' to the nearest gobo
On Galactic Moon, Futurescan1 and Gladiator Revolution, gobos are fixed to colours and are
selected using the colour channel.
Special functions
If all control channels are zero for longer than 10 seconds, the unit will go into 'standby' mode. If it
has a halogen lamp, it will turn off the lamp. Normal operation is restored by moving any control
channel to a non-zero position. If you don't want the unit to go into standby mode, black out the
gobo control but keep the mirror at a nonzero position.
Dipswitch settings
Settings for Futurescan 1CE, 2CE, 3CE/D, Gladiator Rev/CED, DuoColour.
Settings for Galactic Moon
Settings for Colour Changer
11 of 12
Slow strobe Slow strobe
Strobe 2 Strobe 2
Strobe 3 Strobe 3
Strobe 4 Strobe 4
Strobe 5 Strobe 5
Strobe 6 Strobe 6
Strobe 7 Strobe 7
Fast strobe Fast strobe
file:///C:/files/Stagecraft/LIGHTING/futurescan/futurescan3...
Slow strobe
Strobe 2
Strobe 3
Strobe 4
Strobe 5
Strobe 6
Strobe 7
Fast strobe
07/11/2010 6:04 PM