Operating Instructions - HornBlasters MC-228 User Manual

HIGH-FLOW 150 PSI AIR SOURCE KIT

OPERATING INSTRUCTIONS:

IMPORTANT: Always operate the compressor BELOW the
1.
MAXIMUM PRESSURE RATING of the compressor. Please
refer to Application & Specifications Sections of this manual
for details.
Always observe the MAXIMUM DUTY CYCLE of the
2.
air compressor. Refer to Compressor Applications
and Specifications Section of this manual for details.
Operation exceeding maximum pressure ratings and or duty
cycle will result in damage to air compressor.
Your air compressor is equipped with an AUTOMATIC
3.
THERMAL OVERLOAD PROTECTOR. This feature is
designed to protect the air compressor from overheating
causing permanent damage to your air compressor.
The thermal overload protector will automatically cut off
power to your air compressor should the internal operating
temperature of the air compressor rise above safe levels
during excessive use.
Should at any time during use, your air compressor
4.
automatically shuts off; do not attempt to restart air
compressor. Turn power switch to the air compressor to the
OFF position, or remove the in-line fuse. The automatic
thermal overload protector will automatically reset when
internal temperature of the air compressor drops below safe
levels. After allowing
air compressor to cool off for about 30 minutes, you can
safely resume use of the air compressor by turning on
the air compressor.
To prevent discharge of your vehicle's battery, we strongly
5.
recommend that you keep the vehicle's engine running while
using the air compressor. Compressor performance is
enhanced when operating compressor with vehicle's engine
running.
IMPORTANT: ONLY OPERATE THE AIR
6.
COMPRESSOR IN WELL-VENTILATED AREAS.
USER MANUAL