Important Safety Instructions - HornBlasters MC-228 User Manual

High-flow 150 psi air source kit
Table of Contents

Advertisement

HIGH-FLOW 150 PSI AIR SOURCE KIT

IMPORTANT SAFETY INSTRUCTIONS:

CAUTION:
- Do not disassemble. Do not attempt repairs or
modifications. Refer to qualified service agencies for all
service and repairs.
- Do not use this product in or area where it can fall or be
pulled into water or other liquids.
- Do not reach for this product if it has fallen into liquid.
- Use this compressor with 12-volt DC systems only.
- This product should never be left unattended during use.
WARNING:
Never allow children to operate this compressor.
-
Close supervision is necessary when this compressor
is being used near children.
This compressor will become very hot during and immediately
-
after use. Do not touch any part of this compressor with bare
hands.
Do not use this product near flames or explosive
-
materials or where aerosol products are being used.
Do not operate this product where oxygen is
-
being administered.
Do not pump anything other than atmospheric air.
-
Never use this product while sleepy or drowsy.
-
Do not use any tools or attachments without first determining
-
maximum air pressure for that tool
or attachment.
Never point any air nozzle or air sprayer toward
-
another person or any part of the body.
This air compressor is equipped with an Automatic
-
Reset Thermal Protector, and can automatically restart after
the thermal protector resets. Always cut off power source
when thermal protector becomes activated.
Wear safety glasses or goggles when operating this product.
-
Use only in well ventilated areas.
-
To reduce risk of electrical shock or electrocution:
To prevent injuries:
USER MANUAL

Advertisement

Table of Contents
loading

Table of Contents