Sony MDR-RF815RK Operating Instructions Manual page 5

B To connect to LINE OUT or REC OUT
jacks
Transmitter
to AUDIO IN
B jack
B
OFF ON
AUDIO IN
NOISE FILTER
Left channel
(white)
DC IN 9V
R A L
1 2 3
CHANNEL
Connecting cord
(supplied)
Right channel
(red)
to LINE OUT or REC
OUT jacks
Stereo system, VCR,
etc.
C To connect to TV, etc.
If noise occurs when the transmitter is
connected to your TV or VCR, set the
NOISE FILTER switch to ON.
B R
OFF ON
AUDIO IN
NOISE FILTER
Right channel
(red)
Connecting cord
(supplied)
to stereo mini jack
TV, etc.
Notes
• If you connect the transmitter to LINE OUT or
REC OUT jack of an audio reproducer such as an
MD player or CD player, do not set the NOISE
FILTER switch to ON. Otherwise, the volume will
be limited.
• The NOISE FILTER switch is active only in the
case of the connection shown in diagram A on
page 4 and C. In diagram B, the switch has no
effect.
• When the transmitter is placed on or near a TV, it
may pick up a noise.
In such case, place the transmitter away from the
TV.
to AUDIO IN
A jacks
DC IN 9V
A L
1 2 3
CHANNEL
Left channel
(white)
continue to next page
5