Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Guardline GL2000
Summary of Contents for Guardline GL2000
- Page 1 User Manual GL2000 / GL5000 www.guardlinesecurity.com...
-
Page 2: Table Of Contents
1. What’s included in the box? 1.1 Sensor Overview ..........1.2 Receiver Overview .......... The GL2000 model has a 500 ft (150 m) 2. Getting Started range and the GL5000 model has a 1/4 mile 2.1 Powering your Receiver ........ -
Page 3: Sensor Overview
1. What’s included Distance Sensitivity Speed Sensitivity Switches Switches Test Night Mode Button Switch Receiver Sensor Sleep Power Interval Adaptor Battery Compartment Sensor 1.2 Receiver Overview The receiver has up to four zones that you can use to cover a variety of locations. You can also have multiple receivers Sunshade in different locations in your home or business, so you can hear the alarm chimes. -
Page 4: Getting Started
The basic steps for installing and setting up your Guardline and operates wirelessly at a maximum distance from the alarm are: receiver of 500 ft (150 m) for the GL2000 model, or 1/4 mile (400 m) for the GL5000 model. 2.1 Powering your Receiver 2.2 Powering your Sensor... - Page 5 2.3 Pairing Your Sensor and Receiver NOTE Now that your sensor and receiver are powered, your Learn mode has a time-out feature after 30 seconds of sensor needs to be paired with your receiver before your inactivity. If you didn’t hear a beep confirming that your system will function.
-
Page 6: Adding Additional Units
3.1 Pairing Additional Sensors and Receivers • Phillips screwdriver • Electric drill with 3/32” and 9/32” drill bits Your Guardline Driveway Alarm can support an unlimited (recommended) number of receivers and up to 4 sensors per zone, for a • Hammer (optional) total of 16 sensors per receiver. -
Page 7: Advanced Settings
4. Advanced Settings 4.2 Sensor Adjustments Though your Guardline Driveway Alarm System is factory-set to the most common uses, sometimes your needs may require Several switches inside the sensor battery compartment a more customized setup. regulate various sensor functions including Distance Sensitivity, Night Mode, Delay or Sleep Interval, and Speed Sensitivity. - Page 8 3. Use the following guide to set the sensor according to D Night Mode your preferences, using a pen or other hard, narrow object to move the various switches. Turn this ON only if you want your sensor to work during low light or dark settings and not during the day.
-
Page 9: Sensor Field Of View
LED will blink every 5 seconds. 5.1 Pause Mode To check which sensor has low batteries: Your Guardline receiver has the ability to temporarily pause the functioning of your driveway alarm. This is especially 1. Press and hold BATT CHECK useful if you don’t want to disturb others as you leave your... -
Page 10: Connecting An External 12V Device
12v relay feature to activate powered or unpowered 12v external devices such as strobes or sirens. You can even use the 12v relay to tie your Guardline Driveway Alarm into an existing home alarm system. 2. Remove back plate and feed wires through 5.3.1 To add an unpowered 12v external device:... - Page 11 5.3.3 Customizing Your 12v Relay Settings 12V Out: This terminal outputs 12V/300mA when the selected zone is triggered in cooperation with “E” (12V Output Control). Note: See section “E” (12V Output Control) below for assigning zones. NO (Normally Open): Outputs to a closed circuit when the selected zone is triggered in cooperation with “F”.
-
Page 12: Troubleshooting
Most issues that arise can easily be resolved by changing the Multiple Follow the steps below No alarms settings on your Guardline Driveway Alarm or performing receiver in “Multiple Receiver a simple reset. Use the table below to find your exact issue conflict Conflicts”... -
Page 13: Resetting The Zones
Issue Cause Solution Issue Cause Solution Can’t Sensor paired Follow instructions in Inconsistent Incorrect Reset all sensor dip change with different Changing your Chime to alarms sensor switches to factory settings melody/ melody resolve settings (see Advanced Settings) wrong melody? Low Batteries Replace your sensor batteries and re-pair your... -
Page 14: Multiple Receiver Conflicts
7. Accessories 6.3 Multiple Receiver Conflicts 7.1 GUARDLINE Extra Receiver for Driveway Alarm You may have receiver conflicts if you are experiencing interference with the sensors, if you have multiple receivers, Add-on Receiver compatible with the Guardline Driveway and/or if you have over 16 sensors with one or more using Alarm. -
Page 15: Questions
8. Questions? Call Customer Service at: (888) 519-0413, 7am - 3pm Pacific or email us at: info@guardlinesecurity.com Find useful installation videos and how-to articles in the support section at: www.GuardlineSecurity.com/Pages/Help Download installation instructions here: www.guardlinesecurity.com/language...
Need help?
Do you have a question about the GL2000 and is the answer not in the manual?
Questions and answers
The sensor is not pairing to the unit. In other words, there is no beep telling me it has been paired and no subsequent alarm. What are we doing wrong? Watched the videos, reset the units, getting nothing.
The Guardline GL2000 sensor may not be pairing with the unit because it was previously unpaired and has not been re-paired. To fix this, follow these steps:
1. Press and hold the LEARN/NEXT button for 3 seconds to enter Learn Mode.
2. Select the desired zone by pressing LEARN/NEXT.
3. Press and hold PAUSE/RESET for 3 seconds to unpair sensors in that zone (if needed).
4. Turn the receiver off and then on again to exit Learn Mode.
5. Re-pair the sensor with the receiver to receive alerts.
Make sure the sensor is not near electrical interference and is properly powered.
This answer is automatically generated
Are there any batteries that I have to pull out and change?
@Sally A Artus Never mind, I found my answer...
how to get maximum life out of the sensor batteries
my guardline sensor lense is broken, ive been looking for a replacement lense. can you help ? thank you !
Sensor is not sending signal to receiver. Sensor sees movement but receiver does not sound alarm. I have reset the sensor/receiver multiple times. I never get a beep from sensor once I have paired.
Can I buy just the whole price that drew in to the poor