Installation (For The Installer) - NAYATI NGETL 5-50 CE Installation, Operation And Maintenance Instructions

INSTALLATION (for the installer)

Very important!: Before installing, place the appliance on solid, flat, stable and horizontal surface
and connection availability.
The following instructions are intended for authorized and qualified installer. Before doing
installation, adjustment, and maintenance operations, the installer must follow local and legal
regulations. Cut the electrical power before doing any installation.
1. This appliance is using gas. Gas services should be installed according to:
a. Local and international standards
b. Local recommendation, such as building standards and recommendation concern with
combustion
c. Directions and regulations from the gas and power supply companies
d. Regulation concern with prevention accident measures
2. Remove all packaging material and protective coatings.
3. Ensure gas supply is sufficient to operate this appliance.
4. Install the appliance by using Qualified Gas Filter.
5. Before testing, put the appliance in a good ventilated room and keep all flammable material
away.
6. Take a leakage test by using soapy water solution. Spread the soapy solution on joints and pipe
fitting. A leakage will be indicated by bubbles comes from the joints or pipefitting. Another way
is by looking at the gas counter. If there is no movement on the gas counter, it means no gas
leakage.
7. Before cleaning or maintaining the appliance, please isolate gas supply to the safe place.
8. Install the appliance by following Safe International Gas Standards.
ORIENTAL
Manual Instructions for Gas Economic Table Low
13