How To Use Your - T3 SINGLEPASS CURL User Manual

HOW TO USE YOUR

1
Always begin with dry hair. Insert
the tip of a 1-2" section of hair
into the clamp and roll the iron
upwards toward the scalp.
2
While rolling, make sure the hair
does not overlap itself around the
barrel. The entire section of hair
must be evenly wrapped around
the barrel.
3
Hold the iron until the heat has
fully penetrated the hair section.
Then carefully open the clamp
and release the curl.
4
Repeat this for the remaining
sections of hair. For a loose wavy
curl, tug slightly on the curled
section before allowing it to cool.
SINGLEPASS CURL
11