Related Manuals for T3 SINGLEPASS CURL
Summary of Contents for T3 SINGLEPASS CURL
- Page 1 SINGLEPASS CURL User Guide 1" curling Iron; 1 ¼" curling Iron Model No. 76540, 76541, 76542, 76543, 76544, 76545, 76546, 76547, 76548, 76549, 76550, 76551, 76552, 76553, 76554, 76555, 76556, 76557, 76558, 76559...
- Page 2 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following: KEEP AWAY FROM WATER Electricity and water are a dangerous combination and can cause death by electric shock.
- Page 3 IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of burns, electrocution, fire or injury to persons: 1. An appliance should never be left unattended when plugged in. 2. Close supervision is necessary when this appliance is used on, or near children or individuals with certain disabilities. 3.
- Page 4 IMPORTANT SAFETY INSTRUCTIONS while it is hot or plugged in. Use the attached stand. 12. Before plugging in, read the information about world voltage contained in the Operating Instructions section of this manual. Do not use the appliance near a bath tub, washbasin or other vessel filled with water.
- Page 5 MAINTENANCE INSTRUCTIONS SINGLEPASS CURL 1. Your appliance is virtually maintenance free. It contains no user serviceable parts and no lubrication is needed. 2. Keep heated surface clean and free of dust, dirt and hairspray. 3. If cleaning becomes necessary, disconnect the appliance from the power source and let it cool.
- Page 6 MAINTENANCE INSTRUCTIONS SINGLEPASS CURL SERVICING OF DOUBLE-INSULATED APPLIANCES In a double-insulated appliance, two systems of insulation are provided instead of earthing. No earthing means is provided on a double-insulated appliance, nor should a means for earthing be added to the appliance.
- Page 7 OPERATING INSTRUCTIONS SINGLEPASS CURL This appliance is intended for household use. Use on Alternating Current (50/60 Hz). This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way.
- Page 8 OPERATING INSTRUCTIONS SINGLEPASS CURL AUTO SHUT-OFF After approximately one hour, the unit will automatically shut itself off. To reactivate the unit, turn the Power & Temperature switch once to the right. AUTO WORLD VOLTAGE This appliance contains a special electronic circuit that automatically converts it for worldwide usage- from 100 to 240 volts AC 50/60 Hz.
- Page 9 OPERATING INSTRUCTIONS SINGLEPASS CURL Cool Tip Stand Curling Clamp Straight Clip Barrel Thumb Grip Stand Handle Power & Temperature Switch Cord Plug Temperature Guide 410ºF 210ºC 390ºF 199ºC Normal to 350ºF 177ºC thick hair 300ºF 149ºC Fine, damaged 260ºF 127ºC...
- Page 10 OPERATING INSTRUCTIONS SINGLEPASS CURL Turn the Power & Temperature Switch to the right once to turn the tool on. Lights will cascade, then turn solid when the unit is ready to use. To turn the tool off, turn the Power &...
- Page 11 HOW TO USE YOUR SINGLEPASS CURL Always begin with dry hair. Insert the tip of a 1-2" section of hair into the clamp and roll the iron upwards toward the scalp. While rolling, make sure the hair does not overlap itself around the barrel.
- Page 12 T3 LIMITED WARRANTY TERMS & CONDITIONS T3 Micro will repair or replace (at our option) T3 products for twenty- four (24) months from the date of purchase if they are defective in workmanship or materials. This limited warranty does not cover (1)
- Page 13 MODEL NO./SPECIFICATIONS 76540, 76541, 76542, 76543 Operating Voltage: 100-240V Power Consumption: 65-69W 76550, 76551, 76552, 76553, 76554, 76555, 76556, 76557, 76558, 76559 Operating Voltage: 100-240V Power Consumption: 65W T3 Micro, Inc. Venice, CA USA Made in China 0184-76550-D...
- Page 14 Model: 76540, 76541, 76542, 76543, 76544, 76545, 76546, 76547, 76548, 76549, 76550, 76551, 76552, 76553, 76554, 76555, 76556, 76557, 76558, 76559 This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.