Related Manuals for Ghidini Benvenuto EOLO
Summary of Contents for Ghidini Benvenuto EOLO
- Page 1 User’s and Maintenance Manual ENGLISH GHIDINI BENVENUTO s.r.l. Manufacturer Ironing table – EOLO Product 2007 Year Certification Manual drafted in compliance with EC Directive 98/37, Annex I, paragraph 1.7.4 WK42/07...
-
Page 2: General Description
Ghidini s.r.l., relieve the latter of injury to persons and / or damages to things, voiding any warranty bindings, as well. GENERAL DESCRIPTION The ironing table EOLO features a broad universal board available in the Standard or Maxi size, and a sleeve shape (optional), Furthermore, it both of which are padded, electrically heated, and equipped with a suction device. -
Page 3: Machine Components
MACHINE COMPONENTS The machine features the following main components: Pos. ARTICLE DESCRIPTION Pos. ARTICLE DESCRIPTION 463281 Supply cable 173320 Suction pedal 52A004 Handwheel 274122 Padding and net for universal board 42A002 Suction motor 230V / 1ph / 50Hz Z27P31 Std. cloth with zip fastener, padding and net 42A009 Suction motor 380V / 3ph / 50Hz 42H002... - Page 4 IRON WITH HANGER AND LIGHTING RAIL Pos. ARTICLE DESCRIPTION Pos. ARTICLE DESCRIPTION Z08M00 Iron support fitting 22K019 Push rod 534264 Spring 174520 Accessory holder 43A001 Balancer 174521 Bracket for accessory holder 51X010 Ring 39H011 Coil for steam iron solenoid valve 174022 Bracket 39B005...
- Page 5 STEAM IRON TYPE “U” TECHNICAL FEATURES Power supply 220V 50 Hz Iron heater 0,830 Kw + 5 ÷ + 80 °C Working temperature Working humidity 90 % max. - 20 ÷ + 50 °C Storing temperature Net weight 1,8 Kg Pos.
-
Page 6: Machine Unpacking And Installation
MACHINE UNPACKING AND INSTALLATION ATTENTION: The unit must be installed, opened and repaired by fully qualified technicians only. UNPACKING Find the most suitable place where to put the machine, then remove the packaging. Make sure that the machine has not been damaged during the transport and the storage. The packaging material does not require any special precautions for its disposal, for it is not dangerous or polluting at all. -
Page 7: Troubleshooting And Solving
• Open the on-off valve of the steam supply and of the condensation return. • Turn on the main switch of the machine. • Adjust the board temperature by means of the thermostat wheel. • Wait until the boards have reached the required temperature. •... -
Page 8: Hazardous Use
10 HAZARDOUS USE The conformity verification according to the essential safety rules and to the provisions of the machine directive has already been carried out by filling out the specially provided checking lists, included in the technical file. The checking lists are of two kinds: •... -
Page 12: Maintenance Procedures
12 MAINTENANCE PROCEDURES In case of irregularities or malfunctioning, please contact the service technician for the relevant checks. Periodically, it is necessary to carry out the following operations: OPERATION Working hours Cleaning of the condensation return filter This machine does not require special equipment for check and/or maintenance operations. It is however advisable to use suitable tools and personal protections in compliance with the Italian law by decree 626/94, which have to be in good conditions (Presidential Decree 547/55), in order to avoid any damages to persons or machine components. -
Page 13: Conformity Declaration
Phone number Declares that: The machine: Ironing table – EOLO ∗ has been designed in compliance with the DIRECTIVES OF THE EUROPEAN COMMUNITY COUNCIL referring to machines (98/37/EC) and to low voltage (LVD 73/23/EEC). ∗ has been designed, as far as enforceable, in compliance with the following harmonized regulations and technical specifications: EN 292-1/2, EN 1050, EN 982, EN 11200, EN 60947, EN 894-1/2.
Need help?
Do you have a question about the EOLO and is the answer not in the manual?
Questions and answers