Table of Contents
Advertisement
Basic Operations
Notes
1. The keys operation refers to remote
control operation, for panel control
keys operation please refer to Panel
Controls section (p10).
2. Menu Operation Instruction in this
manual is explained according to TV
mode. The operations in other modes
are similar to the one in TV mode, and
users can take it as reference.
3. Before power-on platform, please make
sure that the power supply is stable.
Turn power on / Standby mode
1. Insert the power plug into the power
socket
2. Turn on the power on the Professional
Monitor, (rear bottom left hand side)
3. Press the power key [ ] on the remote
control to turn on the Professional
Monitor.
4. The screen displays the Welcome
menu, Press [
s
preferred language. Select START and
press [OK] key to confirm.
5. Next the screen will display Please
Select Antenna Type. Start Auto Scan",
press [
]/[
Type.
6. Select Next and OK, press [
key to select Search Type. Navigate to
your country and the device will do an
auto channel search after hitting [OK].
]/[
] key to select the
t
] key to select Antenna
]/[
Special Tip
1. This device adopts energy saving
technology. If there is no signal input
in powered-up on state, it will enter
standby state automatically in five
minutes. Or the device will enter standby
state automatically at specified sleep
time.
Signal Source Selection
1. You can connect various devices to the
TV set and view high quality images. If
the video device has HDMI, AV, PC and
other video output ports.
2. Once connected, turn on the device
and press [SOURCE] key, then the
menu of signal source will be displayed
on the screen. Press [
select the input signal, and press [OK]
key to confirm.
]
]/[
] keys to
s
t
13
Advertisement
Table of Contents
