Figure 46. Detach EDP cable connector
Step 4.
Carefully remove the LCD panel.
Refer to "LCD FRUs and CRUs" on page 26 to look up details about the following replacement parts:
LCD bezel
Removable tapes
LCD panel
Remove the camera board
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 30
"Remove the battery pack" on page 31
"Remove the upper case (with keyboard)" on page 47
"Remove the LCD panel" on page 50
Step 1.
Detach the camera connector.
52
Hardware Maintenance Manual