Sony PSP Go 4-152-678-11 Instruction Manual page 54

Notice
Other than when disposing of the system, never remove the
screws and never remove the battery from the system.
Tampering with the system will void the warranty and result
in refusal of service from SCEA. For details, see "LIMITED
HARDWARE WARRANTY AND LIABILITY" (
1
Slide up and hold the POWER/HOLD switch
for more than three seconds to turn off the
system.
2
Disconnect any cables that are connected to
the system.
3
Using a crosshead screwdriver, remove the
screws (6 places).

Before disposing of or transferring the PSP
4
Remove the casing (2 pieces).
page 48).
5
Remove the battery.


system
®
Remove the warranty seal.
Remove the battery, and then disconnect it from the
connector.
Warranty seal
Connector
Battery