Charging The Battery - Sony PSP Go 4-152-678-11 Instruction Manual

Charging the battery

Before using the PSP
purchase, or when the battery charge level is low, follow
the steps below to charge the battery.
Caution
 Stop use, unplug the AC power cord from the electrical
outlet and disconnect any other cables immediately if the
device functions in an abnormal manner, produces unusual
sounds or smells or becomes too hot to touch, or has
become misshapen.
 Do not plug the AC power cord for the PSP
electrical outlet until you have made all other connections.
1
Plug the USB cable into the AC adaptor.
2
Plug the AC power cord into the AC adaptor.
3
Connect the USB cable to the multi-use
connector on the bottom of the system.
0
Charging the battery
system for the first time after
®
system into an
®
4
Plug the AC power cord into an electrical
outlet.
The power indicator lights up in orange, indicating that
charging has begun. The power indicator turns off when the
battery is fully charged.
POWER indicator
3
USB cable
AC power cord
4
To electrical
2
outlet
AC adaptor
1