Lutron Electronics RadioRA Chronos RA-SBT-CHR Programming Manual page 7

Astronomical Time Clock Programming
Step 6
Enter Level Set Mode
From Manage Scenes, select Set Zone Levels. The
list of Time Clock Scenes is displayed:
Select Scene to Set Levels
1. Morning
2. Scene 2
3. Scene 3
4. Scene 4
Back
Use and to highlight a Time Clock Scene.
button) to enter Level Set Mode
Press "Select" (
for the highlighted button. The following screen will be
displayed while level set mode is initiated:
Set Zone Levels
Entering Level Set
Mode...
Once Level Set Mode has been initiated, the following
screen will be displayed:
Set Zone Levels
Set light levels for
devices assigned to
Morning.
Copy Button
Select
Continue
Step 7
Set light levels and GRAFIK
Eye Scenes
®
Use the dimming rocker to adjust the light
level of any Dimmer(s) assigned to the Time
Clock Scene OR use the toggle button to turn
the Dimmer or Switch off if it is to be turned
OFF when the Time Clock Scene is activated.
Select one of the Scenes on a GRAFIK Eye
Control Unit by turning that scene, OR select
the Off Scene button on the GRAFIK Eye
Control Unit if it is to be turned OFF when the
Time Clock Scene is activated.
Setup Guide for the RadioRA Chronos 7
® TM