Connecting An Audio Receiver - Sony WEGA KLV 21SG2 Operating Instructions Manual

Connecting an Audio Receiver

Disconnect all power sources before making any connections.
Using an AUDIO cable, connect the TV's AUDIO OUT jacks to the audio
receiver's AUDIO IN jacks.
Rear of TV
When using your audio system speakers
Set "Speaker" in the (Audio) menu to "Off." The TV's sound is not
output from the AUDIO OUT jacks when "Speaker" is set to "On."
You can still control the volume output from your audio system using the
TV's remote control (see "Programming the remote control" on page 30), by
setting "Audio Out" in the
If you want to adjust the volume through your audio system, set "Audio Out"
to "Fixed."
Notes
• The video signal is not output through the AUDIO OUT jacks.
• When "Audio Out" in the
check if the speaker volume is moderate before switching "Speaker" from "Off" to "On."
Otherwise, the speaker volume may get too loud.
Installing and Connecting the TV
AUDIO-L (white)
AUDIO-R (red)
Audio
input
Audio receiver (Compact
AV system DAV-FC9, etc.)
(Audio) menu to "Variable."
(Audio) menu is set to "Variable," "Speaker" is to "Off,"
AUDIO cable
(not supplied)
15