Installing The Media Receiver Unit Vertically - Sony QUALIA MBD-Q005 User Manual

Installing the Media
Receiver Unit
Vertically
When you install the media receiver unit vertically, use the supplied stand for
vertical installation. Attach the stand to the right side of the media receiver
unit. When you attach the stand, use the edge of a desk or a table, as shown
below.
1
Remove the two small screws from the right side of the media receiver
unit.
Media receiver unit
2
Match the two screw holes on the stand to those on the media receiver
unit.
3
Insert the two screws with washers (supplied) into the holes and tighten
them securely.
Vertical installation stand
Setting Up the TV
Desk or table
27