1. Manuals
  2. Brands
  3. Jaccard Manuals
  4. Kitchen Appliances
  5. VA 4000 AT
  6. Operating instructions for conveyor belt

Jaccard VA 4000 AT Operating Instructions For Conveyor Belt

Food slicer
Hide thumbs
Table of Contents

Advertisement

Quick Links

technical alterations and alterations
regarding accessories reserved
Operating Instructions for Conveyor Belt
Jaccard Corporation
Model
VA 4000 AT
70 Commerce Drive
Rochester, NY 14623
Telephone 1-716-825-3814

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VA 4000 AT and is the answer not in the manual?

Questions and answers

Related Manuals for Jaccard VA 4000 AT

Summary of Contents for Jaccard VA 4000 AT

  • Page 1 Operating Instructions for Conveyor Belt Model VA 4000 AT 70 Commerce Drive Jaccard Corporation Rochester, NY 14623 Telephone 1-716-825-3814...
  • Page 2 Contents 1. INSTALLATION AND INITIAL OPERATION 1.1. I NSTALLATION 1.2. E LECTRICAL INSTALLATION 2. OPERATION 3. CLEANING Page 2...

  • Page 3: Installation And Initial Operation

    1. Installation and initial operation Read these operating instructions as well as the operating instructions for the VA 4000 completely. These additional instructions are only a supplement. Only operate the machine according to the instructions. Always work with care to avoid damage or injury. The installation, introduction and initial operation must be done by an authorized supplier or service technician.

  • Page 4: Cleaning

    Be careful when cleaning the machine, especially in the area of the blade. To carry out the cleaning process, refer to the work instruction WI-Maintenance-001; Cleaning and Sanitizing Procedure provided by Jaccard in the manual kit with this machine. Page 4...
  • Page 5 Illustrated Parts Manual for Food Slicer Model VA 2000 VA 4000 70 Commerce Drive Jaccard Corporation Rochester, NY 14623 Telephone 1-716-825-3814...

  • Page 6: Table Of Contents

    Contents 1. EXPLODED DRAWINGS AND PART LISTINGS 1.1. D 1: M – B RAWING ACHINE 1.2. D 2: M – C RAWING ACHINE OMPLETE 1.3. D 3: D RAWING ISPLAY UPPORT 1.4. D 4: S RAWING TACKING EVICE LATE 1.5. D 5: M RAWING AGNETIC...

  • Page 7: Exploded Drawings And Part Listings

    1. Exploded Drawings and Part Listings 1.1. Drawing 1: Machine Body – Base REF. # DESCRIPTION PART# Base plate 20.000.00 Machine body complete (Drawing 2) 20K001.00 Holding tube assembly (Drawing 3 – VA4000 only) 20K009.00 Stacking device base assembly (Drawing 4) 20K050.00 Carriage sliding support assembly (Drawing 16) 20K100.00...
  • Page 8 Spacer for carriage guide bar 20.018.00 Carriage guide bar – short 27.001.40 Support for guide bar 06.338.01 Conical pressure spring 52.001.00 Carriage guide bar 13.001.40 Bottom plate 20.016.00 Washer 590125044 Toothed washer 556797043 Lens head screw 607985408 Washer 599021085 Toothed washer 556797084 Socket screw 609120825...

  • Page 9: Drawing 2: Machine

    1.2. Drawing 2: Machine Body – Complete REF. # DESCRIPTION PART# Machine body assembly 20Z001.00 Cover plate for side plate (front) 20.001.40 Cover plate for stacking device 20.001.50 Countersunk screw 609630306 Countersunk screw 609630310 page 5...

  • Page 10: Drawing 3: Display

    1.3. Drawing 3: Display Support Tube (VA4000 only) REF. # DESCRIPTION PART# Holding tube body assembly (Drawing 2) 20K001.00 Holding tube assembly 20Z009.00 Holding tube mount assembly 15Z800.00 Cylinder screw 600840406 Wing screw 57.002.10 Welded threaded bolt 544000616 Washer 599021065 Hex nut 609850006 page 6...
  • Page 11 1.4. Drawing 4: Stacking Device Base Plate REF. # DESCRIPTION PART# Stacking device base plate 20.050.00 Magnetic solenoid assembly (Drawing 5) 20K807.00 Chain lock 75.008.10 Toothed washer 556797055 Hex screw 609330520 Light barrier for stacking device assembly (Drawing 6) 20K806.00 Chain frame mount assembly (Drawing 7) 20K061.00 Buffer 1 assembly (Drawing 8)

  • Page 12: D Rawing 5: M Agnetic

    4.20 Shaft seal 56.223278 4.21 Threaded rod for transformer 20.057.00 4.22 Transformer for VA2000 13.155.62 Transformer for VA4000 13.155.90 4.23 Hex nut 609340008 4.24 Metal plate for micro switch assembly (Drawing 11) 15Z810.00 4.25 Hex screw 609330510 4.26 Cylinder screw 609120520 4.27 Bearing for step motor...

  • Page 13: Drawing 6: Light

    4.2.5 Roll for chain 75.008.00 1.6. Drawing 6: Light Barrier for Stacking Device REF. # DESCRIPTION PART# 4.6.1 Plate for light barrier – stacking device 20.806.00 4.6.2 Distance bushing 01.215.01 4.6.3 Light barrier 51.202.00 4.6.4 Cylinder screw 600840310 4.6.5 Hex nut 609340003 4.6.6 Cylinder screw...

  • Page 14: Drawing 7: Stopp

    1.7. Drawing 7: Stop Pin for Chain Assembly REF. # DESCRIPTION PART# 4.7.1 Washer 20.061.00 4.7.2 Adjusting ring 59070508A 4.7.3 Threaded pin 549160403 4.7.4 Hex nut 609340008 4.7.5 Washer 590125085 1.8. Drawing 8: Buffer 1 REF. # DESCRIPTION PART# 4.8.1 Buffer 1 20.058.00 4.8.2...

  • Page 15: Drawing 9: Buffer

    1.9. Drawing 9: Buffer 2 REF. # DESCRIPTION PART# 4.9.1 Buffer 2 20.059.00 4.8.2 Buffer plate assembly 20K060.00 4.9.2 Hex nut 609340008 1.10. Drawing 10: Pin for Pivot Bearings REF. # DESCRIPTION PART# 4.14.1 Bolt for pivot bearing 20.051.00 4.14.2 Flange for pivot bearing 20.051.10 4.14.3...

  • Page 16: Drawing 12: D

    1.11. Drawing 11: Metal Plate for Micro Switch Assembly REF. # DESCRIPTION PART# 4.24.1 Metal plate for micro switch 15.810.00 4.24.2 Quick break switch 51.000.10 4.24.3 Cylinder head screw 600840310 4.24.4 Toothed washer 556797033 4.24.5 Hex nut 609340003 1.12. Drawing 12: Deflection Roller (2 per machine) REF.

  • Page 17: Drawing 13: Stepm

    4.28.2 Spring washer 590127006 4.28.3 Washer 590125065 4.28.4 Washer 599021065 4.28.5 Spring washer 590988061 4.28.6 Needle bearing 50.NKI616 1.13. Drawing 13: Step Motor for Receiving Plate REF. # DESCRIPTION PART# 4.32.1 Step motor 15.002.72 4.32.2 Synchronizing disc 15.011635 4.32.3 Threaded pin 549160304 page 13...
  • Page 18 1.14. Drawing 14: Guided Mechanism for Receiving Plate REF. # DESCRIPTION PART# 4.35.1 Guiding mechanism for receiving tray 20Z151.00 4.35.2 Guiding bracket 20.153.00 4.35.3 Locking mechanism 1 for receiving tray 15.506.00 4.35.4 Locking mechanism 2 for receiving tray 15.507.00 4.35.5 Switch plate for micro switch 15.809.00 4.35.6...

  • Page 19: Drawing 15:

    1.15. Drawing 15: Stacking Device Assembly REF. # DESCRIPTION PART# 4.40.1 Stacking device assembly 20K081.00 4.40.2 Tilting joint assembly 20K084.00 4.40.3 Nylon plug for stacking device 15.605.00 4.40.4 Hex nut 15.602.00 page 15...
  • Page 20 1.16. Drawing 16: Carriage Sliding Support Assembly REF. # DESCRIPTION PART# Sliding support 20.100.00 Carriage locking pin 20Z101.00 Knob 06.131.00 Grip for engaging pin 06.132.00 Contact sheet for light barrier 20.807.00 Tensioning strap 15.002.65 Carrier for Carriage drive assembly (Drawing 17) 20K110.00 Spring holder 20.105.00...
  • Page 21 5.20 Deep groove ball bearing 50.0607RS 5.21 Threaded pin 549140608 5.22 DU bushing 61.00101 5.23 Washer 590125105 5.24 Leveling washer for ball bearing 590101503 5.25 Hex nut 604390006 5.26 Hex screw 609330617 5.27 Threaded pin 549140616 5.28 Threaded pin 549130416 5.29 Washer 599021E43...

  • Page 22: Drawing 17: C

    1.17. Drawing 17: Carrier for Carriage Drive REF. # DESCRIPTION PART# 5.7.1 Carrier for carriage drive 20.110.00 5.7.2 Stop plate for carrier 20.111.00 5.7.3 Threaded pin 549130816 5.7.4 Hex nut 604390008 5.7.5 Spring washer 590127006 5.7.6 Hex screw 609330616 page 18...
  • Page 23 1.18. Drawing 18: Chain Frame Drive page 19...

  • Page 24: Drawing 19:

    REF. # DESCRIPTION PART# Plate 20.230.00 Synchronizing disc assembly (top) (Drawing 19) 15K016.14 Synchronizing disc assembly (bottom) (Drawing 20) 15K015.14 Gasket assembly (Drawing 21) 20K231.00 Stepmotor for chain frame drive (Drawing 22) 20K234.00 Cylindrical screw 600840420 Washer 599021E43 Toothed washer 556797043 Hex nut 609340004...

  • Page 25: Drawing 20: S

    REF. # DESCRIPTION PART# 6.2.1 Synchronizing plate 15.016.14 6.2.2 Free wheel 50HFL1022 1.20. Drawing 20: Synchronizing Plate Assembly (Bottom) REF. # DESCRIPTION PART# 6.3.1 Synchronizing plate 15.015.14 6.2.2 Free wheel 50HFL1022 1.21. Drawing 21: Cover for Chain Drive Bearing page 21...
  • Page 26 REF. # DESCRIPTION PART# 6.4.1 Gasket 20.231.00 6.4.2 Rotary shaft 56.223278 6.19 Deep groove ball bearing 50.6000RS 1.22. Drawing 22: Step Motor for Chain Drive REF. # DESCRIPTION PART# 6.5.1 Synchronizing plate 15.015635 6.5.2 Threaded pin 549160506 4.32.1 Step motor 15.002.72 page 22...
  • Page 27 1.23. Drawing 23: Chain Drive Assembly REF. # DESCRIPTION PART# Guide roller assembly 20K202.10 Press roller assembly (Drawing XX) 20K203.06 Drive shaft assembly 20K204.10 Bracket for press roller (Drawing XX) 20K277.60 Lower coupler assembly 20K208.00 Upper coupler 20.209.00 Spacer rod for chain frame 20.206.10 Chain frame assembly - bottom 20Z210.10...

  • Page 28: Drawing 25: Pressr

    Bearing 50.F687RS Handle 57.001.20 Countersunk screw 609630616 Countersunk screw 609630416 Countersunk screw 609630512 Cylindrical screw 600840506 1.24. Drawing 25: Press Roller Assembly REF. # DESCRIPTION PART# Press roller 20.262.06 Axle for press roller 20.203.00 O-ring 65.040040 Deep groove bearing 50.N607RS Spacer bushing for press roller 20.203.10 Cylindrical screw...
  • Page 29 1.25. Drawing 26: Deflecting Comb Bracket REF. # DESCRIPTION PART# Bracket for deflection roller 20.277.50 Comb 20.207.06 Guide pin for bracket 20.212.01 Spring adjustment 20.213.10 Torsion spring 20.214.10 Threaded pin 545510635 Hex nut 604390006 Washer 599021065 Hex cap nut 609170007 Hex nut 609340005 page 25...

  • Page 30: Drawing 27: Index

    Hex screw 609330516 Hex nut 609340008 Washer for chain frame 58.200802 Washer 599021053 Hex screw 609330510 Flat head screw 600850510 Wing screw 604640610Ex 1.26. Drawing 27: Index Mechanism Assembly REF. # DESCRIPTION PART# Adjusting know assembly (Drawing 28) 20K350.00 Guide strap assembly (Drawing 29) 20K373.00 Thickness plate support assembly (Drawing 30) 20K374.00...
  • Page 31 Spiral washer 20.372.00 7.1. Spiral washer bearing 14.100.00 7.11 Adjusting bracket 1 15.102.00 7.12 Adjusting bracket 2 15.103.00 7.13 Spring for spiral washer 52.022.00 7.14 Threaded pin 549160612 7.15 Threaded pin 549160506 7.16 DU-bushing 61.001225 7.17 DU-bushing 61.001212 7.18 DU-bushing 61.222520 7.19 Threaded pin...

  • Page 32: Drawing 28: Adjusting

    1.27. Drawing 28: Adjusting Block Assembly REF. # DESCRIPTION PART# 7.1.1 Adjusting lever 20.350.00 7.1.2 Pin for spiral wheel 13.101.20 7.1.3 Threaded pin 549160810 7.1.4 Socket head screw 609120830 7.1.5 Hex nut 604390006 7.1.6 Threaded pin 545510616 7.1.7 Threaded pin 549150620 page 28...

  • Page 33: Drawing 29: Indexg

    1.28. Drawing 29: Index Guide Strap Assembly REF. # DESCRIPTION PART# 7.2.1 Guide strap 14.155.00 7.2.2 Distance piece for strap 15.104.00 7.2.3 Spring for strap 52.017.00 7.2.4 Spring washer 590127006 7.2.5 Hex screw 609310660 7.2.6 Groved taper pin 541471528 7.2.7 Washer 590125170 page 29...

  • Page 34: Drawing 30: Thickness

    1.29. Drawing 30: Thickness Plate Support Assembly REF. # DESCRIPTION PART# 7.3.1 Thickness plate support assembly 20Z374.00 7.3.2 Thickness plate assembly 20K300.00 7.3.3 Washer 590125085 7.3.4 Hex screw 609330830 1.30. Drawing 31: Potentiometer Assembly page 30...

  • Page 35: Drawing 32: Carriage

    REF. # DESCRIPTION PART# 7.4.1 Metal plate for potentiometer 51.007.18 7.4.2 Potentiometer 51.007.17 7.4.3 Hex nut 609340004 7.4.4 Pull spring 52.106.00 7.4.5 Hex screw 600840413 1.31. Drawing 32: Carriage Chain Tensioner Assembly REF. # DESCRIPTION PART# Chain tensioner 20.400.00 DC Motor 13.152.00 Spring washer 52.688833...

  • Page 36: Drawing 33: Chain

    8.12 Cylinder head screw 600840411 8.13 roller chain 15.406.00 8.14 Bolt for roller chain 06K137.00 6.19 Deep groove ball bearing 50.6000RS 1.32. Drawing 33: Chain Wheel Carrier Assembly REF. # DESCRIPTION PART# Support plate 20.430.00 Grooved taper pin 541471330 Carrier shaft 20.431.00 Encoder 51.203.02...

  • Page 37: Drawing 34: Chain

    1.33. Drawing 34: Chain Drive Cover Plate REF. # DESCRIPTION PART# 10.1 Chain drive cover plate 20.450.00 10.2 Threaded pin 545510630 10.3 Hex nut 609340006 10.4 Hex nut 609850006 10.5 Hex nut 604390006 Base plate 20.000.00 page 33...

  • Page 38: Drawing 38: Tensioner

    1.34. Drawing 38: Tensioner Assembly REF. # DESCRIPTION PART# 14.1 Tensioner plate 20.011.00 14.2 Tensioner axle 20.012.00 14.3 Synchronizing plate for tensioner 20.013.00 14.4 Washer 590125086 14.5 Hex nut 609340008 14.6 Retaining ring 590471008 14.7 Washer 590125085 14.8 Flange sleeve 61.BB0808 page 34...

  • Page 39: Drawing 39: D

    1.35. Drawing 39: Deflection Roller for Base Plate REF. # DESCRIPTION PART# 15.1 Support for deflection roller - base plate 20.017.00 15.2 Hex screw 609310660 15.3 Needle bearing 50.NKI616 15.4 Adjusting washer 590988061 15.5 Seal 58.240602 15.6 Washer 590125065 page 35...

  • Page 40: Drawing 40: Carriage

    1.36. Drawing 40: Carriage Assembly (medium) REF. # DESCRIPTION PART# Carriage (medium)assembly 20Z650J10 Carriage plate (medium) 20.652J10 Wedge 20.660.00 Cable duct (medium) 20Z661J10 Guide rod for adjusting arm 20.654J00 page 36...

  • Page 41: Drawing 43: Product

    Product support arm assembly (medium) 20K655J11 Carriage arm 20K470J00 Lower food plate assembly 20K670.01 End piece holder assembly 20K500J00 Driving unit for end piece holder (medium) 20K600J10 Hex screw 609330510 Washer 599021053 Hex nut 604390006 Washer 599021065 Hex cap nut 609170007 Cylinder screw 607984840...
  • Page 42 1.38. Drawing 45: Driving Unit for End Piece Holder (medium) REF. # DESCRIPTION PART# End piece holder 20.601J00 Guide rod for end piece holder arm 20.604J00 Washer for end piece holder arm 20.605.00 Washer for end piece holder arm 20.605.10 Round magnet 28.117.00 Retaining bolt for spring...
  • Page 43 Mounting for spring 20.619.00 Torsion spring 20.106J00 Guide rod for end piece holder (medium) 20.617J10 Pipe adapter 20.621J00 Nut for pipe adapter 20.621J10 Cable duct 20.621J20 Trapezoidal spindle 20.613.11 Step motor plate 20.609.00 Front plate for Motor cover 20.608.00 Stepmotor 15.002.75 Countersunk screw 609630416...

  • Page 44: Drawing 46: Lower

    1.39. Drawing 46: Lower Food Plate REF. # DESCRIPTION PART# Lower food plate assembly 20Z670.01 Guide for lower food plate 20.671.01 Mounting for lower food plate 20.672.00 Threaded pin 545510608 Hex nut 609340005 Washer 590125051 58.010010 Hex screw 600840525 58.010011 page 40...

  • Page 45: Drawing 47: Endp

    1.40. Drawing 47: End Piece Holder Assembly REF. # DESCRIPTION PART# End piece holder 20.502.00 Comb for end piece holder 20.503.00 End piece holder plate 14.K046.10 Limiting bolt for end piece holder 20.502J10 Flat head screw 20.502J20 Wing nut 20Z509J00 Bolt for end piece holder 20.504.10 Spacer for end piece holder...

  • Page 46: Drawing 50: Carriage

    1.41. Drawing 50: Carriage Support Arm Assembly REF. # DESCRIPTION PART# Carriage arm 20.470.J00 Tilt support assembly 20K471.00 Star knob assembly 20Z473.00 Plastic tube 20.474.00 Washer 20.605.00 Hex nut 60985510 Grooved taper pin 541471510 Hex screw 609330512 page 42...
  • Page 47 1.42. Drawing 51: Blade Guard Assembly REF. # DESCRIPTION PART# Fixed protection ring around blade edge 20Z754.00 Deflector assembly 20K250.00 Fixing shaft for blade guard 20K755.00 Motor assembly 20K756.00 Knife hub assembly 13K002.12 Blade guard assembly 13Z008.32 Blade guard flange 13.008.32 330 mm blade 13.007.50...

  • Page 48: Drawing 52: Deflector

    Hex screw 609330835 Threaded pin 545510825 Compensation disc for knife hub nut 15.200.00 Compensation disc for knife hub nut 15.201.00 Nut for knife axle 14.002.31 Ring 58.402402 Cylindrical screw 609120530 Deflector 56.808847 Countersunk screw 609630512 Washer 590125051 Toothed washer 556797055 Hex screw 609330512 Body assembly...

  • Page 49: Drawing 53: Motor

    REF. # DESCRIPTION PART# 91.1 Deflector 20.250.00 91.2 Deflector support 20.251.00 91.3 Threaded pin 545510625 91.4 Hex nut 604390006 91.5 58.0M6SW5 91.6 Hex screw 609330625 91.7 Washer 590125065 91.8 Disc spring 52.024.00 91.9 58.100100 91.10 Cylindrical screw 609120620 1.44. Drawing 53: Motor Assembly REF.

  • Page 50: Drawing 54: Blade

    93.8 Spring washer 590127008 93.9 Ring 58.291602 1.45. Drawing 54: Blade Hub Assembly REF. # DESCRIPTION PART# 94.1 Knife hub 13.002.12 94.2 Blade axle 13.002.20 94.3 Helical gear for knife hub 13.002.60 94.4 Deep groove ball bearing 50.6004ZZ 94.5 Leveling washer for ball bearing 590344135 94.6 Retaining ring...

  • Page 51: 1.46. Drawing 55: Foot Assembly

    1.46. DRAWING 55: FOOT ASSEMBLY REF# DESCRIPTION PART# Foot 12.003.00 Foot holder 15.060.60 Rubber disc 58.050031 Countersunk screw 607991825 Threaded pin 545510825 page 47...
  • Page 52 DATE: 09-07-16 PURPOSE 1.1. The purpose of this document is to provide detailed instructions for operating and cleaning the BLADE SHARPENER DEVICE WITH DIAL for Jaccard automatic deli-slicer models VA4000. SCOPE 2.1. Sharpening is indicated when the cut quality is no longer satisfactory or the food products develop shredded strands.
  • Page 53 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 RESPONSIBILITY 6.1. It is the responsibility of the Customer to maintain and execute this procedure. 6.2. The Customer is responsible to assign and train personnel to perform this procedure.

  • Page 54: Safety Requirements

    BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 SAFETY REQUIREMENTS THIS MACHINE SHALL BE CLEANED AND SANITIZED AT INTERVALS TO COMPLY WITH NATIONAL, STATE AND/OR LOCAL HEALTH CODES 8.1. Slicers MUST be dismantled and cleaned every 4 hours. (Reference: FDA Food Code 2013, Chapter §4-602.11) 8.2.
  • Page 55 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 INSTRUCTIONS 10.1. BEFORE SHARPENING THE BLADE, the slicer MUST be completely clean. 10.2. Clean the Slicer following Work Instruction WI-Maintenance-001; Cleaning and Sanitizing Procedure. Gather required items: 10.3.
  • Page 56 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 INSTALL THE SHARPENER 10.5. INSTALL THE SHARPENER 10.6. ATTENTION! Risk of Injury. Trained personnel ONLY! 10.7. Open the thickness plate to maximum distance by rotating the thickness dial counter clockwise until it stops.
  • Page 57 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 MOUNT THE SHARPENING DEVICE 11.1. Visually locate the slot on the bottom of the thickness plate. 11.2. With the sharpener alignment pin facing towards the thickness plate, proceed to lower the sharpener into the space between the thickness plate and the end...
  • Page 58 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 TOP STONE BOTTOM STONE BLADE 11.6. The sharpening stones are now in the correct position. Note the blade edge is positioned between the two sharpening stones.
  • Page 59 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 SHARPENING THE BLADE 12.1. SAFETY NOTE: the blade will not turn if the thickness plate is not in the max open position and the START/STOP button is pushed. ONLY when the thickness plate is opened completely will the blade start turning after pushing the “SHARPEN”...
  • Page 60 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 < 2 sec. 12.3. Turn the gray hand wheel of the sharpener to position # 1. The sharpening stone will engage the blade. 12.4.
  • Page 61 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 16. Relocate the food bar to the back of the carriage. 17. Rotate the end piece holder down into normal operating position. CLEAN & SANITIZE SHARPENING DEVICE 18.1.
  • Page 62 BLADE SHARPENING PROCEDURE VA4000 SLICERS WORK INSTRUCTION REVISION: 02 AUTHOR: G. IDE WI-MAINTENANCE-003; BLADE SHARPENING DATE: 09-07-16 Revision History AUTHOR: DATE: REVISION #: D. PRIOR May-21-15 00 – Initial Release G. IDE March-11-16 01 – Clarification of instructions, grammatical changes G.
  • Page 63 n i t y l i , y l y l i c i l c i f l i o...
  • Page 64 □ c t i □ o i t f i t □ e l l g i l □ □...
  • Page 65 □ g i l i r r l l a o i t t n i – e r - f i t □ n i l t l i f i , . t i c i l S “ ”...
  • Page 66 □ l i o l l e □ s t i s t i . y l □ . l i □ n i t . l i □ l i o s ’ l l a . ) t g i l g i l □...
  • Page 67 l i o f i t l i o □ l i o n i l f i t □ . s l □ c i l S “ ” d c i l □ f i l . t r...
  • Page 68 Jaccard’s VA Stacker Slicer is warrantied for parts and labor* against any material or workmanship defect for the earlier of 12 months or 750,000 slices starting on date purchased from Jaccard or its authorized representative. Normal wear parts are limited to a 30-day replacement warranty (labor not included).

Table of Contents