Features - Sony WEGA KLV-L23M1 Operating Instructions Manual

Features

Picture Adjustment
Mode : Personal
Contrast : 50
Brightness : 50
Colour : 25
Hue : 0
Sharpness : 25
Backlight : 5
NR : Auto
Dynamic Picture : On
C olo u r Tone : Cool
Reset
Select: Set: End:
OK MENU
m
Features
Power Saving : Standard
Speaker : On
AV2 Output : Auto
Select: Set: End:
OK MENU
Power Saving
If you switch the TV off then on again when the Power Saving option is set to Reduce, the setting remains
unchanged.
Speaker
AV2 Output
• If you select Auto, the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart connector
remember to set AV2 Output to TV for correct unscrambling.
• Even if AV2 Output is set to Auto, signals input through Y, P
Scart connector
Features
Power Saving : Standard
Speaker : On
AV2 Output : Auto
,
Select: Set: Back:
OK
The "Power Saving" option allows you to reduce the power consumption of the TV.
To do this:
1
After selecting this option, press OK.
2
Press or to select Reduce.
The "Speaker" Option allows you to select if you want to listen the TV from the TV
speakers or from an external audio equipment connected to the audio output jacks
To do this:
1
After selecting this option, press OK.
2 Press or to select the desired output.
On:
The sound of the TV is output through the TV's speakers.
Off:
The sound of the TV is output through the external audio equipment.
If you have selected Off, the volume of the external equipment can also be
altered by pressing the 2 +/– buttons of the remote control. When the volume
buttons are pressed, the % will appear indicating that the volume you are altering
is not the volume of the TV's speakers, it is from the external equipment.
The "AV2 Output" option allows you to select the source to be output from the Scart
connector / 2. You can record from this Scart any signal coming from the TV
S
or from external equipment connected to the other connectors.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
1
After selecting this option, press OK.
2
Press or to select the desired output signal: Auto, TV or AV1.
/ 2.
S
The "Features" menu allows you to alter various
adjustments of the TV.
End:
MENU
/ 2 or to a VCR connected to this Scart, please
S
/C , P /C jacks of
B B R R
GB
.
3 are not output from
27
Menu System