Features - Sony WEGA KLV-26HG2 Operating Instructions Manual

Features

Picture Adjustment
Mode : Personal
Contrast : 50
Brightness : 50
Colour : 25
Hue : 0
Sharpness : 3
Backlight : 5
NR : Auto
Dynamic Picture : On
C ol o u r Tone : Cool
Reset
Select: Set: End:
OK MENU
m
Features
Power Saving : Standard
Speaker : On
AV2 Output : Auto
Menu Colour : White
Select: Set: End:
OK MENU
Power Saving
If you switch the TV off then on again when the Power Saving option is set to Reduce, the setting remains
unchanged.
Speaker
AV2 Output
• If you select Auto, the output signal will always be the same one that is displayed on the screen.
• If you have connected a decoder to the Scart connector
remember to set AV2 Output to Auto for correct unscrambling.
• Even if AV2 Output is set to Auto, signals input through a "Memory Stick" are not output from Scart
connector
Menu Colour
38
Menu System
Features
Power Saving : Standard
Speaker : On
AV2 Output : Auto
,
Menu Colour : White
Select: Set: OK Back:
The "Power Saving" option allows you to reduce the power consumption of the TV.
To do this:
1
After selecting this option, press
2
Press or
The "Speaker" option allows you to control the sound of the TV speakers when external
audio equipment is connected.
To do this:
1 After selecting this option, press
2 Press or
On
The sound of the TV is output through the TV speakers.
Off
The sound of the TV is not output through the TV speakers.
The "AV2 Output" option allows you to select the source to be output from the Scart
connector 2/
or from external equipment connected to the other connectors.
If your VCR supports SmartLink, this procedure is not necessary.
To do this:
1 After selecting this option, press
2
Press or
2/ 2.
S
The "Menu Colour" option allows you to alter the background colour of the menus.
To do this:
1 After selecting this option, press
2
Press or
The "Features" menu allows you to alter various
adjustments of the TV.
End: MENU
.
to select Reduce.
.
to select the desired output.
2. You can record from this Scart any signal coming from the TV
S
.
to select the desired output signal: Auto, TV, AV1, or AV4.
2/ 2 or to a VCR connected to this Scart, please
S
.
to select White or Black.