Do you have a question about the Y100 and is the answer not in the manual?
Questions and answers
Ramnik Jairath
February 15, 2025
Increase height
1 comments:
Mr. Anderson
February 15, 2025
To increase the height of the Skidee Y100, follow these steps:
1. Unlock the T-Bar: Turn the threaded lock sleeve counterclockwise to unlock. 2. Adjust the T-Bar: Move the T-Bar to the desired height (options: 27.5 inches, 30 inches, or 32.5 inches). 3. Secure the T-Bar: Turn the threaded lock sleeve clockwise to secure it after adjustment.
If you need the handlebar lower than 27.5 inches, loosen the screws, push the popping ball, and lower the handlebar to 24.5 inches.
GENERAL Dear customer, Thank you for choosing our scooter. You can rest assured that you have acquired a high quality product. And also we o er you an excellent after-sales service. Before you convince yourself of the unique driving experience o ered by your new scooter, please read the attached instructions carefully.
Page 4
Important Instructions and Warnings IMPORTANT: Before you allow your child to use our scooter, please read the operating safety instructions carefully, please ensure that the screws are tight, and that the wheels have been correctly secured, and show no signs of wear. IMPORTANT: Undoing the axle screws several times will reduce the e ect of the screw securing product.This means that the screws may come loose by themselves.
Operating Safety Instructions Child should practice rst to gain control of the scooter. We recommend that you practice your scooter on a tra c-free car park or on open asphalt play areas. Ensure that your child always wears a helmet, and wrist, elbow and knee pads, as well as shoes with rubber soles.
Page 6
Cyclists, Rollerblade and Animals. Always observe tra c rules and regulations. Load capacity is up to 130 Lb (60 kg) body weight for the scooter. Scooter (Model No: Y100) for 2+ year Always take care not to risk injuring ngers when folding and unfolding scooter.
Play Instructions Hold on to the ends of the T-Bar or Ring Bar with your hand. You steer the board through the slightest of weight displacements. To Start moving, stand with one leg (the foot approx.at 45 ° angle to the direction of travel) on the board and push yourself o using the other leg.
Page 8
Model No: Y100 Handle Grip Age: 2+year Durable/Eco-friendly TPR Adjustable T-Bar 27.5 inches to 32 inches T-Bar Adjust Ball Handlebar\Steering Rod Rear Brake Colorful Brake With Stainless Steel Non-Slip Deck Red Push Button Wider/More comfortable Folds and unfolds scooter Chassis...
Page 9
Threaded lock sleeve Thicken ALU Tube Adjustable Seat 10.5 inches to 12 inches Seat Folding Button Stronger/Loading up to 110 Lb (50kgs) Button for Horizontal Rotation of Seat Rear PU Wheel Non-Marking/Flash Rear Wheel Bearing Disco Light Front Wheel Bearing...
Page 10
Scooter Fold and Unfold Red Push Button, Fold and Unfold Red Push Button, Fold and Unfold Seat. Scooter. Red Push Button, To Rotate Seat. Ready to Scoot.
Scooter Music and Flash Light Open the Screw to Release Put in 3 AAA Batteries. O (1) Cover. Flash light (2) Music and Disco light (3). Maintenance Music Box. Unscrew the 3 Screws as shown. Slightly Take Out the Music Box. Carfully Place in the New Replacement and Screw Back the 3 Screws.
Page 12
Tighten the Threaded lock sleeve to secure T-Bar after Adjustments. Tighten the Threaded Lock Sleeve Turn the Threaded Lock Sleeve Use the popping ball to adjust the Clockwise to secure T-Bar after Counter Clockwise to Unlock. T-Bar according to kids height. adjustment.
Seat Height Adjustment (until gure B) Seat Removal Tighten the Threaded lock sleeve to secure T-Bar after Adjustments. Unscrew the Screw That is Adjust Seat According to Your Turn the Threaded Lock Sleeve Push the Popping Ball Through Under the Seat Connected to Height Preference.
Maintenance Instructions Right Wheel: turn the Allen Key Left Wheel: Turn the Allen Key clockwise to loosen the screw. clockwise to loosen the screw. Take Out the Put the Enter it Into Screw With Bearing and New Wheel and the Bearing then the Led Add the other Together with...
Need help?
Do you have a question about the Y100 and is the answer not in the manual?
Questions and answers
Increase height
To increase the height of the Skidee Y100, follow these steps:
1. Unlock the T-Bar: Turn the threaded lock sleeve counterclockwise to unlock.
2. Adjust the T-Bar: Move the T-Bar to the desired height (options: 27.5 inches, 30 inches, or 32.5 inches).
3. Secure the T-Bar: Turn the threaded lock sleeve clockwise to secure it after adjustment.
If you need the handlebar lower than 27.5 inches, loosen the screws, push the popping ball, and lower the handlebar to 24.5 inches.
This answer is automatically generated