Video2(Component); Image Shift; Cooling Mode; Lamp Replacement - Sony Bravia KF-42E200A Operating Instructions Manual

Video2(Component)

Selects the type of the video jack to be used from those on the left side of the TV.
Press M/m to select one of the following, then press
Auto: Activates the component video jacks (Y, P
jack is selected when the component video jacks are not connected.
Off: Activates the composite video jack (

Image Shift

TV Video
Corrects the image on your TV.
Before adjusting
Auto (Factory setting): Automatically corrects double images.
Level 1-4: Aligns the images and improve the picture. The adjusted value tends to move
strongly away from Level 1, and towards Level 4.

Cooling Mode

TV
Selects "High" when you use the TV at an altitude of 1,500 m or higher.
Select "Normal" to use the TV at normal altitudes.
Press M/m to select "High", then press

Lamp Replacement

Selects this option after you replace the lamp.
When the lamp nears the end of its life, a message appears every time you switch on the TV.
Press </, arrow to select "Yes", then Press
Follow the on-screen procedure.
Notes
• Depending on environmental and other conditions, such as frequency of use, some lamps may burn
out before the lamp replacement message appears on the screen.
• Until you set the Lamp Replacement option, a message announcing that the lamp is at the end of its
life will appear every time you switch on the TV.

Cinema Drive

TV
Provides an optimized display by automatically detecting the film content. Moving pictures
will appear clearer and more natural-looking.
Press M/m to select "Auto", then press
Tip
You can select this option for NTSC system pictures only.
TV Video
PC
Video PC
TV Video PC
Video
.
/C , P /C ), however, the composite video
B B R R
).
After adjusting
.
.
.
37
GB