Setting The Scale; Taking Measurements - Fora TN'G Scale 550 Operating Instructions Manual

SETTING THE SCALE

Before using the scale for the first time, input these settings. To ensure accuracy,
make sure you complete the steps below and save the desired settings.
Start with the scale off. Press SET to turn the scale on:
1. Select the personal profile number.
Press ▲ or ▼ to select a number from P1 to P5. Press
SET.
2. Enter the personal profile data.
Press ▲ or ▼ to set the gender to male or female.
Press SET.
Press ▲ or ▼ to set the height unit to ft' in" or cm
unit. Press SET.
When the height unit is set to ft' in", the unit of weight
will be automatically set to pounds. When the height
unit is set to cm, the unit of weight will be
automatically set to kilograms.
Press ▲ or ▼ to set the height between 3' 3.5" and
7' 2.5" / 100 cm and 220 cm. Press SET.
Press ▲ or ▼ to set the age between 6 and 99. Press
SET.
Press ▲ or ▼ to set the voice language (English,
Spanish or French]). Press SET.
Press ▲ or ▼ to set the voice volume. Press SET.
3. Press SET to exit the setting mode.
If you make a mistake before finishing, repeat the steps from "Select the personal
profile number."
NOTE:
Your settings are automatically saved when you exit
the setting mode.

TAKING MEASUREMENTS

Before Measuring
• Place the scale on a hard, flat surface. Soft or uneven flooring (e.g. carpets, rugs)
may cause the scale to give an inaccurate weight reading.
• Measurement must be taken with your feet dry and positioned correctly. Remove
your shoes and socks before stepping onto the scale.
• Step onto the scale with your feet parallel to each other and your weight evenly
distributed.
• Weigh yourself on the same scale at the same time every day, before breakfast or
before getting dressed.
NOTE:
When receiving the scale for the first time, or if you move the scale to a different
location, press the SET button and quickly release to turn the scale on and wait for the
LCD to display 0.0. Please wait 2 seconds then start the measurement.
Measuring weight and Body Mass index (BMI)
1. Press SET or tap on the weighing platform to turn
on the scale. The scale displays the profile setting of
the last user.
Press ▲ or ▼ to select the desired profile number.
NOTE:
The scale will automatically turn on while stepping on
it under standby mode.
2. Wait for "0.0" to appear on the display window.
3. Step onto the weighing platform.
Stand still and make sure your weight is evenly
distributed.