Sony Bravia KDL-52S4100 Operating Instructions Manual page 25

qd
qf
qg
qh
qj
qk
Insert two size AA batteries (supplied) by matching the e and E
on the batteries to the diagram inside the remote control's battery
compartment.
Button Description
qd INPUT Press to display the list of external inputs. Press repeatedly to
toggle through the inputs.
qf V/v/B/b Press V/v/B/b to move the on-screen cursor. Press
select/confirm an item.
qg TOOLS Press to display the Tools Menu that is associated with your
current input: analog TV, digital TV or external inputs. (See
pages 27, 28, 32 and 36.)
While in PC input mode, PIP can be selected from the Tools
Menu. The PIP feature allows the viewer to see both PC input
and TV channels simultaneously.
Main Window
(PC)
To Change Channels in the PIP Window
Press CH +/– to change the channel or enter the channel
number using the 0-9 numeric buttons.
To Exit from PIP
1
2
qh JUMP
Press to jump back and forth between two channels. The TV
alternates between the current channel and the last channel that
was selected.
qj 0 - 9 ENT Press 0 - 9 to select a channel; the channel changes after two
seconds. Press ENT to change channels immediately.
qk CH +/–
Press to scan through channels. To scan quickly through
channels, press and hold down either +/–.
Inputs can be changed by pressing V/v and
while the list of external inputs is displayed.
See page 35 for information about setting up the
external inputs labels, including the Skip feature.
For compatible PC Timings, refer to the PC Input
Signal Reference Chart (see page 41).
You may also press JUMP to return to the previously
viewed channel.
Press TOOLS.
Press V/v to highlight Exit PIP and press
You may also press RETURN to exit this feature.
Basic Operations
to
Sub Window
(TV channel)
to exit.
25