Setting Up The Channel List - Initial Setup - Sony BRAVIA KDL-46V25L1 Operating Instructions Manual

Getting Started
Setting Up the Channel List – Initial Setup
18
After you finish connecting the TV, you can run the Initial Setup to create a
list of available analog and digital channels. The Initial Setup screen
appears when you turn on the TV for the first time after hooking it up. If you
do not want to set up the channels at this time, you can do it later by
selecting the Auto Program option in the Analog and Digital Setup
settings (see pages 37 and 38).
POWER
1
Press to turn on the TV.
The Initial Setup screen appears.
2
Press V/v to highlight the on-screen display language. Then press
The message "First please connect cable/antenna. Do you want to start
Auto Program?" appears.
3
B b
Press / to highlight "OK" then press
The message "Auto Program" appears. Then the message "Continue
programming digital channels?" appears. This may require 50+ minutes
for completion.
4
B b
Press / to highlight "OK" then press
To run Auto Program again at a later time
❑
Use the Auto Program feature as described on pages 37 and 38.
To add individual digital channels
❑
Use the Digital Channels feature as described on page 38.
.
.
.