Installing The Tv; Preventing The Tv From Toppling Over - Sony BRAVIA KDL-46V25L1 Operating Instructions Manual

Installing the TV

Preventing the TV
from Toppling Over
Attaching the Support Belt
TV stand
1
Screw the support belt (supplied) to the TV stand with a wood screw
(supplied).
2
Attach the support belt to the stand with the securing screw (supplied)
using a coin, etc.
3
Adjust the length by pulling the support belt toward you while holding
the stand.
Be sure to take measures to prevent the TV from toppling over and
causing injury.
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough, use
commercial screws 3 to 4 mm (1/8 to 3/16 inches) diameter to fit to the
TV stand. Consult your dealer about the types of screw.
stand
Getting Started
15