Advertisement
Quick Links
OPERATING MANUAL
STICK
HKZW-STICK - V1.0
The Stick is a USB v2.0 full speed low power CDC-ACM compliant Z-Wave adapter in a
thumb drive form factor. The Stick can act as a Z-Wave Controller when it's connected to a
host like PC, MAC or Gateway (some in the market) etc. With a certain program installed on
the PC, it can add or remove devices in or from a network.
Ⅰ. GENERAL INFORMATION ABOUT STICK
1. Product layout
72.39mm
12.71mm
2. Specifications
Power supply:
DC 4.75~5.25V
Advertisement
Related Manuals for Z-Wave HKZW-STICK
Summary of Contents for Z-Wave HKZW-STICK
- Page 1 The Stick is a USB v2.0 full speed low power CDC-ACM compliant Z-Wave adapter in a thumb drive form factor. The Stick can act as a Z-Wave Controller when it’s connected to a host like PC, MAC or Gateway (some in the market) etc. With a certain program installed on the PC, it can add or remove devices in or from a network.
- Page 2 The stick can act as a secondary controller within an existing Z-Wave network after the terminal program being installed. You can also use the stick to make a new Z-Wave network. As the device exports a USB CDC/ACM class compliant interface, it appears as a serial port, reusing existing standard drivers on most popular PC operating systems.
- Page 3 Grouping Send Commands Identifier Nodes Group 1 0xE8 Ⅵ. Factory Default Reset It happens automatically when the device is excluded. Ⅶ .Security features Default node info frame: COMMAND_CLASS_ZWAVEPLUS_INFO COMMAND_CLASS_SECURITY COMMAND_CLASS_SECURITY_2 COMMAND_CLASS_TRANSPORT_SERVICE COMMAND_CLASS_VERSION COMMAND_CLASS_MANUFACTURER_SPECIFIC COMMAND_CLASS_POWERLEVEL COMMAND_CLASS_APPLICATION_STATUS COMMAND_CLASS_ASSOCIATION COMMAND_CLASS_ASSOCIATION_GRP_INFO COMMAND_CLASS_CONFIGURATION COMMAND_CLASS_CRC_16_ENCAP COMMAND_CLASS_SUPERVISION COMMAND_CLASS_INCLUSION_CONTROLLER The NIF can be modified in PC Controller.