Download Print this page

Nil-Cor 310 Series Installation Maintenance And Operating Instructions

Swing check valves

Download this manual

Installation, Maintenance and Operating Instructions

Nil-Cor Swing Check Valves have been designed for easy installation, assembly and

maintenance. We recommend installation in piping systems with flat face flanges. The

all-FRP composite construction provides long, trouble free service in difficult corrosive

environments, both inside the valve and outside.

CAUTION: Refer to the Nil-Cor Corrosion Guide, Catalog 1000, to verify suitability for

chemical applications. Contact factory for assistance for chemicals not listed.

For Technical information and dimensions, please refer to the current edition of the

Nil-Cor Swing Check Valve Technical Specification

4855 Broadmoor Ave. ° Kentwood, MI 49512 ° Phone: (616) 554-3100

20-Feb-2012

Nil-Cor Swing Check Valves

Series 310

Catalog 411

Page 1 CAUTION: Refer to the Nil-Cor Corrosion Guide, Catalog 1000, to verify suitability for chemical applications. Contact factory for assistance for chemicals not listed.
Page 2 Site Storage Precautions 2. Isolate and depressurize the valve. 3. Secure valve to the lifting device using the lifting eye on 1. For outside site storage ensure valves or containers are wrapped in plastic or otherwise protected from ingress of the valve.