Siemens SIMATIC PCS 7 Function Manual page 18

Amendment on Engineering Manual
3.2 Configuration of the "Order Creation" dialog
Name
BatchListCustomColumn1Max
BatchListCustomColumn1MaxChar
BatchListCustomColumn1Enumeration
→ Not supported at present
BatchListCustomColumn2Type
BatchListCustomColumn2Caption
BatchListCustomColumn2Operation
BatchListCustomColumn2Min
BatchListCustomColumn2Max
BatchListCustomColumn2MaxChar
BatchListCustomColumn2Enumeration
→ Not supported at present
18
Description
Valid when BatchListCustomColumn1Type = Integer or Real
Maximum input value for the user-defined column (default: 0)
Valid when BatchListCustomColumn1Type = String
Maximum number of characters for entry in the user-defined column (default: 0)
Valid when BatchListCustomColumn1Type = Enumeration
List of alternatives separated by | which are to be shown in the combined box of
the user-defined column.
The default for new batches can be overwritten via SelectedBatchCustomCol‐
umn1Enumeration.
Type of the second user-defined column in the batch list
Options:
● none (default ): No user-defined column is displayed.
● Integer: One column with numerical content is displayed.
● Real: One column with floating-point content is displayed.
● String: One column with text content is displayed.
● Enumeration: One column with a combined box as content is displayed.
→ Not supported at present
Valid when BatchListCustomColumn2Type is not "none"
Heading of column, if visible (default: Custom2)
Options:
● enabled (default):
The operator can change the values in the use-defined column.
● disabled:
The operator is not authorized to change the values in the user-defined column.
Valid when BatchListCustomColumn2Type = Integer or Real
Minimum input value for the user-defined column (default: 0)
Valid when BatchListCustomColumn2Type = Integer or Real
Maximum input value for the user-defined column (default: 0)
Valid when BatchListCustomColumn2Type = String
Maximum number of characters for entry in the user-defined column (default: 0)
Valid when BatchListCustomColumn2Type = Enumeration
List of alternatives separated by | which are to be shown in the combined box of
the user-defined column.
The default for new batches can be overwritten via SelectedBatchCustomCol‐
umn2Enumeration.
Advanced Process Functions SIMATIC BATCH Integration
Function Manual, 07/2016, A5E38719543-AA