Viewing Pictures From Connected Equipment - Sony Bravia KDL-26BX320 Operating Instructions Manual

Viewing pictures from
connected equipment
Turn on the connected equipment, then
perform one of the following operation.
For an auto-tuned VCR page 7
In analogue mode, press PROG/CH +/–, or the
number buttons, to select the video channel.
For other connected equipment
Press to display the connected equipment list.
F f
Press / to select the desired input source, then
press . (The highlighted item is selected if two
seconds pass without any operation after pressing
f
.)
Inputs
Digital
Analogue
AV1
AV2
HDMI1
HDMI2
Component
PC
For a USB device
See page 21.
Symbol on the Description
screen
Component To see the equipment connected to
G.
HDMI1 or HDMI IN 1 or HDMI IN 2
HDMI2 To see the equipment connected to
A or B.
Digital video and audio signals are
input from the connected equipment.
If the equipment has a DVI socket,
connect the DVI socket to the HDMI
IN 1 socket through a DVI-HDMI
adaptor interface (not supplied), and
connect the equipment's audio out
sockets to the audio in sockets in the
HDMI IN 1 sockets.
Connect to the HDMI IN 2 socket,
to view photographs or screen
images from a PC or digital video
camera.
AV1 To see the equipment connected to
D.
20
GB
Symbol on the
screen
PC
AV2
~
• Be sure to use only an authorised HDMI cable bearing
the HDMI logo. We recommend that you use a Sony
F
/
HDMI cable.
• When HDMI control compatible equipment is
connected, communication with the connected
equipment is supported. Refer to page 24 to set up this
communication.
To connect
Conditional
Access Module
(CAM) H
USB I
Hi-Fi audio
equipment F
DIGITAL
AUDIO OUT
(OPTICAL) E
Headphones
K
Description
To see the equipment connected to
C.
z
• It is recommended to use a PC cable
with ferrites like the "Connector, D-
sub 15" (ref. 1-793-504-11,
available in Sony Service Centre), or
equivalent.
To see the equipment connected to
J.
When connecting mono equipment,
connect to the AV2 L socket.
Do this
To use Pay Per View services.
For details, refer to the instruction
manual supplied with your CAM.
Turn off the TV when inserting or
removing your CAM.
~
• CAM is not supported in some
countries/regions. Check with your
authorised dealer.
You can enjoy photo/music/video
files stored in a Sony digital still
camera or camcorder (
page 21
Connect to the audio output sockets
to listen to the sound from the
TV on Hi-Fi audio equipment.
Audio level of the external speakers
can be modified by pressing the
volume buttons on the remote.
Use an optical audio cable.
Connect to the i socket to listen to
sound from the TV on headphones.
).