Table of Contents
Advertisement
12. ADHESIVE MOUNTS
Clean and dry the mounting surface before applying an adhesive mount. We suggest cleaning the
surface with a small amount of alcohol and applying the mount at room temperature. Let the adhesive
cure for 24 hours before use.
Read all safety information below and operating instructions
WATERPROOF
Your iON 4K is waterproof to a depth of 10 meters (30 feet) without the use of a waterproof case.
CAUTIONS AND WARRANTY
This Important Product Information Guide contains regulatory, safety, handling, disposal and recycling
information, as well as the 1 year limited warranty for your iON 4K camera. Read all safety information
below and operating instructions before using iON 4K camera to avoid injury.
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other injury
or damage.
BATTERY AND HANDLING
iON 4K uses a non-removable, non-changeable, rechargeable lithium-ion, 3.7V, 1500mAh battery. The
battery may present a hazard if mistreated. Do not disassemble or crush the camera. To charge, only
use the USB Cable with a high power USB port on a computer or other device that is compliant with the
USB 2.0 or 1.1 standards, car, or battery charger.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other household
wastes throughout the U.S. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please use
proper return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
before using iON 4K camera to avoid injury
EN-8
Advertisement
Table of Contents
