3. SETTING UP
Download iON 4K Storyteller to your PC/Mac from the iON 4K website. The link below will help you set
up your camera to make sure it is registered, update the time on your camera, and get the settings
dialed to your custom configuration.
4. CHARGING THE BATTERY
Slide the door up to open.
Connect your camera to a PC/Mac using the supplied USB Cable.
The Battery Status LED indicates the charge level of the battery. It will change colors from red to green
as the battery charges.
Charge is fully complete when the Battery Status LED turns green. This can take up to three hours.
5. FORMATTING THE microSD CARD
Format the microSD Card prior to recording so your camera is able to properly read and write to it.
Check that the Record Slider is in the off position. Open the back of your camera then press and hold
the Format Button until the camera beeps (three to five seconds), then release the Format Button. The
microSD Card LED will flash while the card is formatting and then turn solid green when the format is
complete.
The iON 4K is compatible with:
microSD compatibility.
SDSC (standard capacity) 4GB class 4 card minimum.
SDHC (high capacity) class 4, 6, or 10 microSD Cards up to a maximum capacity of 32GB.
http://www.ioncamera.com/start iON 4K
Caution: formatting the card will erase everything on it
EN-4