Rear Seats - Chevrolet Blazer 2019 Getting To Know Manual

POWER FRONT SEATS
POWER SEAT ADJUSTMENTS
A. Seat Cushion Adjustment
Move the control to move the seat forward or
rearward and to tilt, raise or lower the seat.
B. Seatback Adjustment
Move the top of the control to recline or raise
the seatback.
C. Lumbar Adjustment
Move the control to adjust the lumbar support.
SET MEMORY POSITIONS
1. With the vehicle in Park, adjust the driver's
seat, power steering column
side mirrors to the desired positions.
F
2. Press and release the SET button on the driver's door. A beep will sound.
3. Immediately press and hold button 1 or 2 until two beeps sound.
To store a seat position for more clearance when exiting the vehicle, repeat these steps
Exit button instead of button 1 or 2.
using the
RECALL MEMORY POSITIONS
Press and hold button 1, 2, or
The memory/exit positions can be programmed to be recalled automatically when the
ignition is turned on/off (for exit recall, the driver's door must be opened).
To set the recall options, go to Settings > Vehicle > Seating Position > Seat Entry
Memory and Seat Exit Memory.

REAR SEATS

REAR SEAT ADJUSTMENTS
Pull the lever (A) on the side of the seat and
move the seatback to the desired position.
Release the lever.
Lift up the bar (B) under the seat and slide
the seat to the desired position.
FOLDING THE REAR SEAT
1. Press the button on the head restraint. It will fold automatically.
2. Pull the lever (A) on the side of the seat and fold the seatback forward. From the
cargo area, pull the lever on each side of the cargo area to fold the driver-side rear
seatback or passenger-side rear seatback.
6
Optional equipment
F
F
, and power out-
F
Exit until the set position is reached.
A
See Seats and Restraints in your Owner's Manual.
B
See Seats and Restraints in your Owner's Manual.
B C
A