Sony BRAVIA KDL-40Z4100 Operating Instructions Manual page 11

Item
1 VIDEO IN 1
S VIDEO
VIDEO IN 2/3
VIDEO/L(MONO)-
AUDIO-R
2 COMPONENT IN
1/2 (1080p/1080i/
720p/480p/480i)/
L-AUDIO-R
3 PC IN
(RGB/AUDIO)
4 HDMI IN 1/2/3
HDMI IN 4
R-AUDIO-L
5 LAN (10/100)
x
6 DMe
/
SERVICE
7 DIGITAL AUDIO
OUT (OPTICAL)
8 AUDIO OUT
(VAR/FIX)
9 DMPORT
0 CABLE/
ANTENNA
qa USB
qs AC IN
* Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
Description
Connects to the S VIDEO output jack of video equipment. If both composite video and
S VIDEO are connected, S VIDEO signal has priority.
Connects to the composite video and audio output jacks on your A/V equipment.
~
• If you have mono equipment, connect its audio output jack to the TV's L (MONO)
audio input jack.
Connects to your equipment's component video (YP
Connects to a personal computer's video and audio output connector (see page 14). Can
also be connected to other analog RGB equipment. See "PC Input Signal Reference
Chart" on page 14 for the signals that can be displayed.
~
• For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If this is the case, connect the adapter to the computer before connecting the
HD15-HD15 cable.
• If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen
settings on page 46.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between this TV and any HDMI-equipped A/V equipment. HDMI
supports enhanced, or high-definition video, plus digital audio.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the
HDMI IN 4 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the
AUDIO IN (L/R) jacks of HDMI IN 4.
~
• Be sure to use only an HDMI cable that bears the HDMI logo.
• When connecting a DVI-equipped PC to an HDMI jack, also connect an Audio cable
between the PC and R-AUDIO-L jack.
Connects to a Local Area Network using an Ethernet cable. You can use this connection
to connect to a network and receive software updates from the Internet.
This USB port is for service only unless you are connecting the optional BRAVIA
x
external module (DMe ).
Connects to the optical audio input of your digital audio equipment that is PCM/Dolby*
Digital compatible.
Connects to the left and right audio input jacks of your analog audio equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
Connects to devices via a DIGITAL MEDIA PORT interface (not supplied) and displays
photos or plays videos and music directly onto the TV from some DIGITAL MEDIA
PORT equipment. Some devices can be controlled with the TV's remote control (see
page 26).
RF input that connects to your cable or VHF/UHF antenna.
Connects to USB equipment to access photo files and music files (see page 33).
Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
P ) and audio (L/R) jacks.
B R
11