Sony Bravia KDL-40U2000 Operating Instructions Manual page 19

Country
Auto Tuning
Programme Sorting
AV Preset
Sound Offset
Manual Programme
Preset
Selects the country/region where you operate the TV.
Tip
The country/region in which you want to use the TV does not appear in the list, select
"-" instead of a country/region.
Tunes in all the available analogue channels.
Changes the order in which the analogue channels are stored on the TV.
F f
1 Press / to select the channel you want to move to a new position,
g
then press .
F f
2
Press / to select the new position for your channel, then press
Assigns a name to any equipment connected to the side and rear sockets.
F f
1 Press / to select the desired input source, then press
F f
2 Press / to select the desired option below, then press
• "
AV1 (or AV2/ AV3/ AV4/ PC/ HDMI), VIDEO, DVD, CABLE, GAME, CAM,
": Uses one of the preset labels to assign a name to connected equipment.
SAT
• "Edit": Creates your own label.
• "Skip": Skips an input source that is not connected to any equipment when you
press F/f to select the input source.
Sets an independent volume level to each equipment connected to the TV.
Before selecting "Label"/"AFT"/"Audio Filter"/"Skip"/"Decoder", press
select the programme number you want to modify. Then, press
System
Presets programme channels manually.
F f
1
Press / to select "System", then press
F f
2 Press / to select one of the following TV broadcast systems, then
G
press .
B/G: For western European countries/regions
D/K: For eastern European countries/regions
L: For France
I: For the United Kingdom
Note
Depending on the country/region selected for "
available.
Channel
F f
1 Press / to select "Channel", then press
F f
2 Press / to select "S" (for cable channels) or "C" (for terrestrial
channels), then press
3
Tune the channels as follows:
If you do not know the channel number (frequency)
F f
Press / to search for the next available channel. When a channel has been found,
the search will stop. To continue searching, press
If you know the channel number (frequency)
Press the number buttons to enter the channel number of the broadcast you want or
your VCR channel number.
4
Press to jump to "Confirm", then press
f
5 Press to select "OK", then press
Repeat the procedure above to preset other channels manually.
Label
Assigns a name of your choice, up to five letters or numbers, to the selected channel.
AFT
Allows you to fine-tune the selected programme number manually if you feel that a
slight tuning adjustment will improve the picture quality.
.
Country
" (page 5), this option may not be
.
g
.
F f
/
.
.
.
.
.
F f
/ to
.
.
19
GB