Sony BRAVIA 4-168-148-E5(1) Operating Instructions Manual page 25

Noise Reduction
MPEG Noise
Reduction
Advanced Settings
Reset
~
• "Noise Reduction" and "MPEG Noise Reduction" are not available when "Picture Mode" is set to "Photo".
• "Advanced Settings" is not available when "Picture Mode" is set to "Vivid" or for USB (Photo/Music) input.
Sound
Sound Effect
Surround
Treble
Bass
Balance
Reset
Dual Sound
Auto Volume
Reduces the picture noise (snowy picture) in a weak broadcast signal.
"High/Medium/Low": Modifies the effect of the noise reduction.
"Off": Turns off the "Noise Reduction" feature.
Reduces the picture noise in MPEG-compressed video.
Customizes the Picture function in more detail.
"Adv. Contrast Enhancer": Automatically adjusts "Backlight" and "Contrast" to
the most suitable settings judging from the brightness of the screen. This setting is
especially effective for dark images scenes, and will increase the contrast distinction
of the darker picture scenes.
"Auto Light Limiter": Reduces glare such as in scenes where the entire screen is
white.
"Live Colour": Makes colours more vivid.
Resets all "Picture" settings except "Picture Mode" to the factory settings.
Selects the sound mode.
"Dynamic": Intensifies clarity and sound presence for better intelligibility and
musical realism.
"Standard": Enhances clarity, detail, and sound presence.
"Clear Voice": Makes voice sound clearer.
Selects the surround mode.
"Surround": For surround sound (for stereo programmes only).
"Simulated Stereo": Adds a surround-like effect to mono programs.
"Off": For normal stereo or mono reception.
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasizes left or right speaker balance.
Resets all the "Sound" settings to the factory settings.
Selects the sound from the speaker for a stereo or bilingual broadcast.
"Stereo", "Mono": For a stereo broadcast.
"A"/"B"/"Mono": For a bilingual broadcast, select "A" for sound channel 1, "B"
for sound channel 2, or "Mono" for a mono channel, if available.
z
• If you select other equipment connected to the TV, set "Dual Sound" to "Stereo", "A" or "B".
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend
to be louder than programmes).
Continued
25
GB