IVIEW S200 Manual

Motion sensor

Table of Contents

Download this manual

S200 Motion Sensor

iView Smart Motion Sensor S200 is part of a new generation of smart home devices that makes

life simple and cozy! It features compatibility and connectivity with Android OS (4.1 or higher),

or iOS (8.1 or higher), using the Iview iHome app.

Product Configuration

Reset button

Inductive area

Battery

Indicator

Holder

Screw stopper

Screw

Device Status

Ready to connect

When Triggered

When Alarm Stops

Resetting

Indicator Light

Light will blink rapidly.

Light will slowly blink once.

Light will turn on for a few seconds then off. Light will then slowly

blink in 2-second intervals

Table of Contents

Do you have a question about the S200 and is the answer not in the manual?

Page 1 S200 Motion Sensor iView Smart Motion Sensor S200 is part of a new generation of smart home devices that makes life simple and cozy! It features compatibility and connectivity with Android OS (4.1 or higher), or iOS (8.1 or higher), using the Iview iHome app.
Page 2 Before setting up, make sure your phone or tablet is connected to your desired wireless network. 1. Open your iView iHome app and select “ADD DEVICE” or the (+) icon at the top-right corner of the screen 2. Scroll down and select OTHER PRODUCTS”...
Page 3 3. Install the \motion sensor into your desired location by screwing the holder into a wall of your choice. Unscrew the cover and remove the insulating strip beside the battery to turn on (insert the insulating strip to turn off). Press and hold the reset button for a few seconds. The light will turn on for a few seconds, and then turn off, before rapidly blinking.
Page 4 Sharing Device Control: 1. Choose the device/group you want to share with other users. 2. Press the Option button located at the Top-Right corner. 3. Choose Device Sharing. 4. Enter the account you want to share the device with and click Confirm. 5.
Page 5 Troubleshooting My device failed to connect. What do I do? 1. Please check if the device is powered on; 2. Check if the phone is connected to Wi-Fi (2.4G only). If your router is dual-band (2.4GHz/5GHz), select 2.4GHz network. 3. Double-check to make sure the light on the device is blinking rapidly. Wireless router setup: 1.

S100