D-Link COVR-2202 Reviewer's Manual page 8

Set Up Using the D-Link Wi-Fi App
C100 M0 Y19 K23
Pantone 3145C
D-Link Wi-Fi
1. 2.
Download the free Open the app and tap
D-Link Wi-Fi app from Install New Device.
the App Store or
Google Play.
13 13
3. 4. 5.
Tap Yes and use your Follow the instructions When the LED on your
phone to scan the QR to connect your existing Covr Point blinks amber, it
code on the base of broadband modem or is ready for configuration.
the Covr Point. router and power up Tap NEXT.
your Covr devices ready
for installation. Tap NEXT
to move through the
steps until your modem
or router is connected
and powered on.
6. 7. 8.
D-Link Wi-Fi will attempt Set a Wi-Fi network Set a device (admin) password
to detect your internet name (SSID) and for your Covr network. This
connection type. If your password. You should password is used to access
internet uses a PPPoE try to choose a strong your Covr network's settings
connection, enter the details password which is through the D-Link Wi-Fi app
given by your service difficult for others to or web-based interface. This
provider. Tap NEXT to guess. Tap NEXT to password should be different
continue. continue. from the Wi-Fi password
specified in the previous step.
Tap
9. 10.
Covr can automatically Setup is now complete.
install updates to make A summary of your Covr
sure that your system is network settings will be
always up-to-date and shown on the screen. Tap
performing at its best. SAVE
Select Keep my device up settings. You will now be
to date automatically to guided on how to place
enable this function. Tap your Covr Points around
NEXT. your home.
NEXT to continue.
to confirm these
14
14