GHL ProfiLux SMS-Module Manual

GHL ProfiLux SMS-Module Manual

Advertisement

Quick Links

Dear customer,
You have purchased a high-quality product which has been checked several times during production. In the unlikely event of
experiencing a malfunction, despite our quality control, you should proceed as follows:
In case of a claim please contact your retailer immediately
Please don't try to repair the damage by yourself
You should use the original package to avoid damage during transport
Please read these instructions carefully to avoid damage and to be able to use the SMS-module optimally.

1 Shipment

These parts must be present:
SMS-module
Antenna
AC/DC adaptor
RS232-connection cable
This manual

2 Features

This SMS-Module can inform you about the state of one or more ProfiLux controllers by sending a SMS message. The sending
of a SMS message can be initiated by a certain event (e.g. alarm or power cut). Up to 30 phone numbers and events can be
predefined. The SMS-Module has a lithium-ion-battery with built-in charge controller, for this reason it is able to send a message
even during a power cut. The additional RS232-port allows the connection of a PC or a ProfiLux View at the same time. Four
Digital Inputs for monitoring other devices complete the functional range.
Manual for SMS-Module
Please read following instructions carefully.
Non-observance may cause loss of warranty!

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ProfiLux SMS-Module and is the answer not in the manual?

Questions and answers

Summary of Contents for GHL ProfiLux SMS-Module

  • Page 1 Manual for SMS-Module Please read following instructions carefully. Non-observance may cause loss of warranty! Dear customer, You have purchased a high-quality product which has been checked several times during production. In the unlikely event of experiencing a malfunction, despite our quality control, you should proceed as follows: ...
  • Page 2 3 Connections Power supply Switch (here switched off) Port for PC or ProfiLux Port for ProfiLux Digital inputs View Due to transport reasons the antenna has been shipped separately. Screw the antenna onto the provided socket. Insert the DC-jack of the AC/DC adaptor into the power supply connector of the SMS-Module and the mains voltage plug into a wall outlet.
  • Page 3 To switch the SMS-Module on, the slide switch on the rear must be shifted to the right, until the symbol  can be seen. Figure 1 – Switch on the right: Device is switched on Now the device will start, the state is indicated by these LEDs: GSM (red) –...
  • Page 4 set checkmark here Figure 2 – Example for connection settings Hints:  If no SMS-module is present you should remove the checkmark, otherwise the connecting will take longer.  A ProfiLux must be connected; otherwise it is not possible to establish a connection. ...
  • Page 5  State of the 4 digital inputs – if a voltage is present a checkmark will be indicated  Power cut – if no mains power supply is present a checkmark will be indicated  Today already sent – the amount of SMS messages which have been sent today so far ...
  • Page 6 Figure 5 - Example for send condition alarm Following settings can be defined for a SMS message:  Telephone number – to this number (in international format) the SMS message will be sent  Text – the recipient will be shown this text ...
  • Page 7 SIM-card and to chose the setting Maximum SMS per day not too high! Then your costs will be limited. 10 Warranty GHL GmbH & Co. KG grants a warranty of 24 month beginning with the date of purchase for all processing or material defects. The original bill is your warranty certificate. 11 Disclaimer of liability The manufacturer excludes liability for any (consequential) damages or charges caused by the use of this device.

Table of Contents