Hytronik HEM02 Instruction Manual

INSTRUCTION MANUAL FOR EMERGENCY LED DRIVER

DESCRIPTION

This emergency lighting module is designed to convert a wide range of LED types, and is an ideal choice for converting
most standard LED luminaries and arrays containing from 3 to 20 (60V) LEDs in series.
This unit is designed to utilize the existing LED driver and panel layout (no need to break into the LED circuit) to be
dimmed to 3W in case of emergency.
The driver automatically adjust the output LED current to provide the best optimum match between the battery and the
load, providing maximum illumination whilst ensuring full battery duration. The driver is compatible with a wide range of
lighting LEDs.

WIRING DIAGRAM

BALLAST LUMEN FACTOR%
Luminaire Power
60%

IMPORTANT

It is recommended that the module is installed by a competent person ensuring the installation complies with the
neces-sary standards. Hytronik accept no resonsibility for injury, damage or loss, which may arise as a result of
incorrect installation, operation or maintenance.
The conversion requires an unswitched supoly for charging the battery and a switched supply for a maintained conversion.
HYTRONIK INDUSTRIAL LIMITED
Room D, 10/f, Tower A, Billion Center, 1 wang Kwong Road,
Kowloon Bay, Kowloon, Hongkong
T: 00852-35197525
E: info@hytronik.com
MODEL NO. : HEM02
5W 7W 10W 12W
43% 30% 25%
F: 00852-30116936
15W 20W 25W
20% 15% 12%
CHINA FACTORY
Block A6, Nan'pu Science & Technology Park, Hao'si,
Shajing Street, Bao'an District, Shenzhen, P.R.C. 518104
T: 86 755 27322200 F: 86 755 27308687
E: info@hytronik.com W: www.hytronik.com
30W 35W 40W
10% 9% 8%
45W 50W
7% 6%