Related Manuals for dough Xpress TXM-SS
Summary of Contents for dough Xpress TXM-SS
- Page 1 TXM-SS Manual Tortilla Press OWNER’S MANUAL OWNER’S MANUAL OWNER’S MANUAL TXM-SS shown For Customer Service, Call 1-800-835-0606 ext. 205 or Visit www.doughXpress.com CONTENTS Unpacking / Inspection / Installation Operation Cleaning / Maintenance Specifi cations Warranty BEFORE warranty repair you MUST get Prior Authorization:...
- Page 2 RECEIVING & INSTALLATION Please read this manual in its entirety before operating your press. UNPACKING Remember to save all packing materials - including any crating, boxes, liners and boards. You may need these for shipping your machine or should a repair be necessary in the future. INSPECTION Inspect your machine for hidden shipping damage.
- Page 3 INITIAL SETUP SETTING UP YOUR PRESS 1. Push the power on button located on the front right face of the press. This is the master power on/off button. The yellow on/ off button on the left gives you the option of turning the heat on/ off the lower platen.
- Page 4 OPERATION 4. To set the fi nished tortilla thickness, turn the dial on the top of the machine as indicated. 5. Wait for the machine to reach your preset temperature which will be indicated on the digital readout. It takes approximately 30 minutes for machine to reach full temperature.
- Page 5 CLEANING / MAINTENANCE WARNING Before cleaning, maintenance, or repairs, make sure the machine is off and unplugged! This appliance is not waterproof. Never spray or pour water on any electrical appliance. CLEANING TEFLON COATED HEAT PLATENS You may clean the Tefl on coated platens with a mild soap and warm water.
- Page 6 SPECIFICATIONS PRESS SPECIFICATIONS Dimensions Width: 22-1/2 inches, 57.2 centimeters Height: 31-3/8 inches, 79.2 centimeters Depth: 30-7/8 inches, 78.4 centimeters WEIGHT Press Only: 217 lbs. Shipping: 235 lbs. EXTERIOR Stainless Steel, Type 304 With #4 Polished Finish...
- Page 7 NOTES...
- Page 8 WARRANTY BEFORE warranty repair you MUST get Prior Authorization: Call 1-800-835-0606 Warranty will be voided otherwise. NOTICE Our system will automatically register the equipment on the date it was shipped. If the equipment was not purchased directly from HIX, but through a distributor (either domestic or foreign), please keep a copy of their sales invoice showing the serial number and date it was sold/shipped to you with this warranty.
Need help?
Do you have a question about the TXM-SS and is the answer not in the manual?
Questions and answers