4
5
6
7
8
32
Setting up the VCR Plus+
The upper row shows VCR Plus+ guide channels and the lower row shows
TV channels or cable box out put channels. Press B/b to select the channel
number that does not match the guide channel.
• If you made Hookup 1 (page 15) or 2 (page 17): Enter the actual number
on your TV (and VCR), then press V/v.
• If you made Hookup 3 (page 19): Enter the cable box output channel
(usually 2, 3, or 4), then press V/v.
Repeat steps 4 and 5 for each channel number that does not match.
Press O RETURN to confirm the setting.
Press SET UP to exit the menu.
®
system (SLV-D560P only)