Sony SLV-D360P Operating Instructions (For SLV-D360P DVD Player) Operating Instructions Manual page 111

4
Press SET UP to exit the menu.
Menu choices
The default settings are indicated in bold print.
Menu option
Auto Power Off
RF Output Channel
Setting the RF Output channel
When connecting the DVD-VCR to the TV
using only the antenna cable, you must set
the RF Output channel in the "OPTION
SETUP" menu so that the TV can receive the
correct signal from the DVD-VCR.
?/1 CHANNEL +/–
1
Set the RF Output channel to "3CH" or "4CH" (see page 110 to set the channel),
whichever channel is not used in your area. If both are used, set the switch to
either channel.
2
Press ?/1 to turn on the DVD-VCR.
3
Press TV/VIDEO to turn on "VIDEO" in the DVD-VCR's display window.
4
Press CH +/– to display a channel number in the display window.
Select an active channel number in your area.
Set this option to
• "Off" to deactivate the Auto Power Off function.
• "1Hr"/"2Hr" to turn the DVD-VCR off automatically if no
signal is received and you do not press any of the buttons
during this time.
• "3CH" when using channel 3 to receive the VCR signal.
• "4CH" when using channel 4 to receive the VCR signal.
For details, see page 111.
TV
?/1
CH +/–
TV/VIDEO
continued
General setup information
111