Xiaomi ZMI 10 User Manual

ZMi 10 power bank
Read the instructions carefully before using the device.

Safety label instructions

Each genuine portable battery has a protective label on the outside of the
package. Please erase a special cover and enter your code at official
website.
The company-manufacturer: LLC «ZMI Electronic Technology»
Address: Jiangsu Province, 159 Cheng Jiang Central Road, A913.
• Before using the battery for the first time, fully charge it.
• When the battery is used, a display of a digital device should light up, this
indicates a correct operation of the device.
• You can select the cable yourself to charge this battery or to charge other
devices.
• If the LED indicators do not light up while charging the digital device, the
battery is completely discharged. Please charge it right away.
• When the digital device is connected to the battery, the charge of this
portable charger is being charged.
• After fully charging the battery, immediately unplug it from a power supply.
• If a short-circuit on the battery output or for other reasons the protection
mode activates (after the LED button is pressed, the indicators do not light),
charge it with external power supplies, and then it will return to normal
operation.
This device is equipped with a lithium-ion battery. It is strictly forbidden
to disassemble a case of the device, in order to prevent the battery from
breaking.
Strictly prohibited any dismantling, squeezing, puncturing the device; It is

Cautions

Attention
also forbidden to place it in water, in a fire or expose it to a temperature
above 60 ° C (140 ° F).
USB port input

Mode indicator:

Double-click the charge check button to
turn on the HUB mode. The blue indicator
indicates a successful activation of the HUB
mode, absence of a blue indicator indicates
that the HUB mode is turned off.
Caution: «Charge level check» button is
not designed to turn the device on / off. This
device has a function of automatic detection
of charging and discharging, so there is
no need to constantly press the charge
level check button. Two minutes before the
discharge, the charge level indicators turn
off.
USB port output
Charge level indicators
Charge level check
Mode indicators